Notices
LS - 4th Gen (2007-2017) Discussion topics related to the current flagship models LS460, LS460L and LS600H

Side Mirror Reverse Drop - On One Side Only?

Thread Tools
 
Search this Thread
 
Old Jan 19, 2015 | 10:30 AM
  #1  
7milesout's Avatar
7milesout
Thread Starter
Advanced
10 Year Member
 
Joined: Nov 2014
Posts: 659
Likes: 109
From: Georgia
Default Side Mirror Reverse Drop - On One Side Only?

Guys,

Not the typical "why don't they drop down" question. Mine do drop down in reverse. Has anyone found a way to only drop the passenger side mirror?

I strongly dislike my driver's mirror dropping down.

I frequently find and park in a space with a curb to the right of the car. And I park close to it to leave maximum space to the car to my left. In order to minimize the door dinging potential. I like the RH mirror to drop so I can put the tires like an an inch or so to the curb.

But I very rarely ever curb park to the left side. It makes it too difficult to get out of the car.

That being said, I look for obstacles out my LH & rear view mirror. I can't see obstacles when the LH mirror is pointing at the ground. Yes, I look at the screen in the car also.

Has anyone found a way to change this? I have not found a setting in the customizable setting menu for this.


7milesout
Reply
Old Jan 19, 2015 | 04:00 PM
  #2  
CJITTY's Avatar
CJITTY
Lead Lap
10 Year Member
Liked
 
Joined: Jul 2010
Posts: 4,785
Likes: 154
From: The South
Default

Haven't heard or seen this setting. Interesting take because I absolutely love the dual tilt on Reverse, especially left side parallel parking or backing into a space. I use corner parking spaces and I get my wheel less than a foot away to maximize room on the pass side to avoid dingers
Reply
Old Jan 19, 2015 | 04:19 PM
  #3  
XpediencY's Avatar
XpediencY
Pit Crew
10 Year Member
Liked
 
Joined: May 2012
Posts: 161
Likes: 11
From: TX
Default

Put it into reverse, flip to the switch to "L" and adjust it to where you would like to see it (In your case, identical to if you're not in reverse). You can do the same with "R" as long as you're still in reverse.

You just have to keep the switch in either "L" or "R" when you reverse for it to tilt. Keeping it in the center position will make the mirrors do nothing.

This is how you adjust the tilt mirror settings when you reverse.
Reply
Old Jan 19, 2015 | 05:50 PM
  #4  
7milesout's Avatar
7milesout
Thread Starter
Advanced
10 Year Member
 
Joined: Nov 2014
Posts: 659
Likes: 109
From: Georgia
Default

Interesting. I'll try that. Maybe I'm weird but I really enjoy reading the owner's manual but I don't recall having readthat. I didn't read the whole thing yet. Maybe that's why.
Reply
Old Jan 20, 2015 | 06:09 AM
  #5  
jamodeo's Avatar
jamodeo
Instructor
iTrader: (1)
 
Joined: Dec 2007
Posts: 802
Likes: 11
From: Hinsdale, Illinois
Default

Originally Posted by XpediencY
Put it into reverse, flip to the switch to "L" and adjust it to where you would like to see it (In your case, identical to if you're not in reverse). You can do the same with "R" as long as you're still in reverse.

You just have to keep the switch in either "L" or "R" when you reverse for it to tilt. Keeping it in the center position will make the mirrors do nothing.

This is how you adjust the tilt mirror settings when you reverse.
I know for sure the 4GS does this but I was not aware that the LS did this. I think I have tried in my LS but I am going to try again since you said that.

It is quite odd what features some models share, and some features that are picked or just left out/forgotten about for other models.

-Joe
Reply
Old Jan 20, 2015 | 08:09 AM
  #6  
bobflood's Avatar
bobflood
Driver School Candidate
 
Joined: Aug 2014
Posts: 26
Likes: 0
From: Georgia
Default

Originally Posted by XpediencY
Put it into reverse, flip to the switch to "L" and adjust it to where you would like to see it (In your case, identical to if you're not in reverse). You can do the same with "R" as long as you're still in reverse.

You just have to keep the switch in either "L" or "R" when you reverse for it to tilt. Keeping it in the center position will make the mirrors do nothing.

This is how you adjust the tilt mirror settings when you reverse.
This is how it works in the 2014 LS I just got. I did a memory save after I adjusted them. Instructions in manual were pretty confusing. I haven't tried it, but see no reason that DS mirror couldn't be adjusted to not move when put in Reverse. Good luck and report back on results.
Reply
Old Jan 21, 2015 | 11:56 AM
  #7  
jamodeo's Avatar
jamodeo
Instructor
iTrader: (1)
 
Joined: Dec 2007
Posts: 802
Likes: 11
From: Hinsdale, Illinois
Default

Originally Posted by bobflood
This is how it works in the 2014 LS I just got. I did a memory save after I adjusted them. Instructions in manual were pretty confusing. I haven't tried it, but see no reason that DS mirror couldn't be adjusted to not move when put in Reverse. Good luck and report back on results.
Does not work on '13

-Joe
Reply
Old Feb 21, 2015 | 06:38 AM
  #8  
7milesout's Avatar
7milesout
Thread Starter
Advanced
10 Year Member
 
Joined: Nov 2014
Posts: 659
Likes: 109
From: Georgia
Default

Following these instructions did not work for my 2010. Looked in the owner's manual and could find no way to defeat this either.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b2884987
RX - 3rd Gen (2010-2015)
20
Nov 28, 2025 07:55 PM
RichKeagy
LC Model (2018-present)
2
Feb 21, 2020 04:49 PM
dbs600
LX - 1st and 2nd Gen (1996-2007)
3
May 16, 2014 08:52 AM
DarkknessD
GS - 3rd Gen (2006-2011)
9
Sep 5, 2010 08:34 AM




All times are GMT -7. The time now is 11:09 PM.