When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The reverse-tilt feature is affected by the L/R switch that selects which mirror is controlled by the L/R/U/D adjustor switch. The reverse-tilt feature is disabled when that switch is left in the neutral (center) position. I am not sure what the logic for this is - I guess it is a way to disable it if you have some reason to want it disabled.
Actually I dont want it enabled, had it working even when the switch was on Auto.
What happened is i had some CD ejection issues. My Pioneer CD/DVD Player ejects CD's on humps or sometimes just like that. I took it for repair.
Two weeks i got a call from the foreman informing me that the unit is ready and has been repaired. I remember putting the gear on "R" at home and the side windows sloped down a bit. After the unit has been put back to where it was i dont see the windows sloping down no matter what i try. Auto mode , left , right. Wont work.
The switch that I am referring to is the little switch - in the middle of the Up/Down/Left/Right cluster switch - to the left of the Auto switch. That switch, when left in the center position, disables the reverse-tilt feature.
The switch that I am referring to is the little switch - in the middle of the Up/Down/Left/Right cluster switch - to the left of the Auto switch. That switch, when left in the center position, disables the reverse-tilt feature.