1305 code

Reply Subscribe

Thread Tools

Search this Thread

Oct 30, 2011 | 12:38 AM

mr858

Thread Starter

Driver School Candidate

Joined: Oct 2005

Posts: 4

Likes: 0

From: FL

1305 code

Had timing belt changed and now keep getting DTC 1305. Changed igniter and it still occurs. Any suggestions?

Oct 30, 2011 | 12:39 AM

mr858

Thread Starter

Driver School Candidate

Joined: Oct 2005

Posts: 4

Likes: 0

From: FL

Quote:

Originally Posted by mr858

Had timing belt changed and now keep getting DTC 1305. Changed igniter and it still occurs. Any suggestions?

96ls400...car keeps cutting off

Oct 30, 2011 | 01:16 AM

PureDrifter

BahHumBug

iTrader: (10)

Joined: Aug 2004

Posts: 23,920

Likes: 114

From: California

P1305? you probably cut a wire between the ignitor and the coil. check the harness especially near the covers for the timing belts/distributors.

Oct 30, 2011 | 02:48 AM

steve2006

Lead Lap

Joined: Jan 2007

Posts: 683

Likes: 3

From: UK

Check particularly around the crank shaft position sensor wiring, it's fairly easy around there to not redress the wiring loom correctly and get the wires damaged.

Oct 31, 2011 | 09:27 AM

AussieAuto

Rookie

Joined: Oct 2011

Posts: 77

Likes: 1

From: Ontario

I have changed cam position sensors for that code, 1 from damage to wiring when someone did a t/belt and another was just a bad sensor with 425k on it...

Oct 31, 2011 | 11:42 AM

imspencer

Driver School Candidate

Joined: Aug 2011

Posts: 13

Likes: 0

From: Texas

Good advice with checking wires to a from coil. As I just bought a '96 and just did the TB/WP. Mine started giving me the same code and I found the bottom clips to the coil had cracked and plug was loose and not making good contact. enjoy, =spence