Icons

Hey new here but was wondering if anybody has this issue. I installed putco LEDs and they work fine but for DRL they don't work. Any help would be great. Thx.

rgarjr

iTrader: (1)

When you're in DRL mode, they receive like half voltage than when you're using them as high beams. Did u get the module for them?

Icons

I didn't get any module for them I was wondering because the wedge led is pretty big and has about 13 led on one bulb. So I think I might try a different wedge led.

rgarjr

iTrader: (1)

It doesn't matter how big or many LEDs the bulb has in it. It's a voltage issue.

my1s250

iTrader: (1)

it should still light up but not at full power without the module..and you said wedge LED so you sure its the DRL or city light? if it doesn't work turn the bulb around because there polarize

flosc32

V-Leds have the best LED's. go to www.v-leds.com I have them on my 07 GS450h and I haven't seen a better LED yet. Their delivery of the lights are fast too! I got mine in 2 days from the time I ordered them.

Supraristo

iTrader: (12)

So, if you replace the fugly yellowish DRL with led's, you need a module? What other solutions are there if I wanna just run white DRL's?

imherenow

did u change the sides when putting in the LED bulb due to polarity..Or u might need this http://www.v-leds.com/Exterior-LED/D...-p6297704.html

LudeNsoL

iTrader: (14)

Yes you will need a module to run leds as drl's

Supraristo

iTrader: (12)

What about not running led's and just replacing them with white lights?

flosc32

I have an 07 GS45H and I have LED DRL's and they have a faint flicker to them because I didn't use the module or harness for the light. Check out these and tell me what u think. V-LEDS 6K HID WHITE 28 LED 13W DRL/FOG LIGHT BULBS HB3 9005 H10 9145 go to www.v-leds.com. The light and the color is the best I have ever seen and they ship to you very quickly too. Hope this helps.

imherenow

oo wow ..so iwas thinking of ordering LED (18 SMD) for DRL from a private dealer but now after reading it i might have to get a module? that sucks.

HIDness

iTrader: (1)

If anyone of you guys planning to use Vled without the module, you guys are missing out. With the module connected, it stop the flickering, the light output is much clearer and so much brighter. A huge difference.

808_GS400

iTrader: (14)

check out ijdmtoy.com they have LED DRL kits that comes with resistors for many different applications.

wpbmed

has any one been able to replace the DRL's with HID? Does this work at all, or if you put HID lights in, do they just stay on Bright all the time?