When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've got a 93 sc400 and the dash indicator light showed that one of my tailights was out. I noticed it was the right, bottom tailight. I went to replace it but then noticed that this light actually works when the brake is pressed, but doesn't work when the night lights are on. I've done a search, but didn't seem to find my problem: any suggestions?
conscious: May want to double check that. I have a '95 sc300, but I think the lighting structure is the same. The parking lights should be powered by three 194 bulbs on the upper portion of the taillamp. The brake lights are powered by 1156 bulbs on the lower portion of the taillamp (inclusive of the turn and backup lights).
No I didn't change the bulb as it was working fine when the brakes were pushed and I had been given the wrong bulb. From a previous search, I think the tailights were changed after '94 and the bottom light is definitely activated on the drivers side, but not the passengers when the night lights are on. I thought of the fuses, but I understood them to be, "If it works, it works - if it's broken it won't".
Have I missed something? Thanks again for the help.
Hey I'ld just pull the bulb from the side that works and see if it works on your problem light socket !If not then cjust follow your harns back to yuor fuse and check for breaks or burned wires .good luck!
soory for not clairifying ,if the bub from the side that does work also works in the opposing side, the latter bulb should be replaced.. if it shows the same symptoms as the original then check wiring harness. then clean the contacts of your signal ,taillight ,brakelight receptical.
lots of luck ean [prince of darkness]