When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have had remote start put on my car by a shop a few months ago, but it wouldnt work because i needed a key with a chip to hide so it will start. Without the key it would just crank. The shop where i had it installed is now closed down. Now that i finally had the time to get one made what do i do to get it started?
That is not right, The install should have had a bypass module installed which works around and with the alarm, imobilizer and locks in the car. It cranks over but doesnt start because the imobilizer has shut off the fuel supply and probably the spark as well.
As the dealer that did the install is not around, I think you need to go to a shop and have it installed properly. You should be able to start lock/ unlock the car without having a key anywhere around the car.
Where do I get it and how much would they run? I see the link, but no pricing.
you can check fleabay....just make sure whom ever u order it from can flash it w the proper firmware (just tell them yr,mk mdl car) also get the multi version (green box)
its a way old piece.... an needs 2 keys to program.. get the idatalink.. u only need 1 key.. an its easy to install an program
Are referring to the 555XW? Yes it is an older piece and it does NOT need two keys to program. I only have a valet key and it worked just fine.
The Idatalink is very popular and easy to use. To the OP, you will probably get more information on using the Idatalink over the 555XW as it seems to be used a lot with installs now.
Are referring to the 555XW? Yes it is an older piece and it does NOT need two keys to program. I only have a valet key and it worked just fine.
The Idatalink is very popular and easy to use. To the OP, you will probably get more information on using the Idatalink over the 555XW as it seems to be used a lot with installs now.
I had already ordered the 555xw once i saw it on ebay. For that price, i cant go wrong. So long as i dont need an extra key.
Are referring to the 555XW? Yes it is an older piece and it does NOT need two keys to program. I only have a valet key and it worked just fine.
The Idatalink is very popular and easy to use. To the OP, you will probably get more information on using the Idatalink over the 555XW as it seems to be used a lot with installs now.
correct only need 1 key for 555xw was thinking of diff mod (for ford)... funny i actually have a 555xv 2ft from me (from my 2gs...) it never did work.. hope u have better luck
I actually found the 555x model in my car. I guess the last installer left in there. I have no clue why he didnt install it. Its still nib. For some reason he said i still need a key, but this immobilizer says it doesnt need a key. I also have the 555xw on the way, but i think theyre the same. Lmk which i should install.