Remote Start / Alarm advise
Thread Starter
Driver School Candidate
Joined: Nov 2011
Posts: 12
Likes: 1
From: In
Remote Start / Alarm advise
2005 es330
I have a new Autopage C3-RS-730 2way remote start / alarm in the box. I knew I would have to buy a module to override the anti theft. I didn't realize I would need another master key to program the module. I only have one master key. Is this true that it takes 2 master keys? Any advise on where to get a cut master key for cheap?
I have a new Autopage C3-RS-730 2way remote start / alarm in the box. I knew I would have to buy a module to override the anti theft. I didn't realize I would need another master key to program the module. I only have one master key. Is this true that it takes 2 master keys? Any advise on where to get a cut master key for cheap?
Lexus Champion
Joined: May 2010
Posts: 1,817
Likes: 89
From: Orlando STRONG!!
no need to get a 2nd key.. all u need is the Idatalink ADS-TB bypass mod it learns the from the 1 key u have to bypass oem transponder system... but u will need an authorized idatalink dealer to flash the mod with the appropriate firmware...
http://store.idatalink.com/index.php?l=product_list&c=2
http://store.idatalink.com/index.php?l=product_list&c=2
Lexus Test Driver
Joined: Aug 2006
Posts: 954
Likes: 5
From: NY
You could use PKALL bypass module without using the master key. Here is the link: http://www.amazon.com/Directed-Elect.../dp/B001N7RE44
Lexus Champion
Joined: May 2010
Posts: 1,817
Likes: 89
From: Orlando STRONG!!
You could use PKALL bypass module without using the master key. Here is the link: http://www.amazon.com/Directed-Elect.../dp/B001N7RE44
Lexus Champion
Joined: May 2010
Posts: 1,817
Likes: 89
From: Orlando STRONG!!
once upon a time u could go online an flash the mod but as of aug of last yr idata requires u set up an acct to flash a module..(i have a lot of local shops, send guys by regularly so i can flash mods for them). what id suggest is whomever u buy the mod from make sure they can put the proper firmware on the ADS-TB before they ship it out.. then u can print the install guide free online...
make sure you give the shop/company u get the mod from ALL the info u have...what brand,model alarm as well as yr,mk,mdl car so they can set it up properly.. d2d (data to data) mode will save a ton of time in installing the alarm.. if not u can always go w2w (wire to wire)
make sure you give the shop/company u get the mod from ALL the info u have...what brand,model alarm as well as yr,mk,mdl car so they can set it up properly.. d2d (data to data) mode will save a ton of time in installing the alarm.. if not u can always go w2w (wire to wire)
Last edited by Shibumi1; Jan 23, 2012 at 09:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
polluxtroy
ES - 1st to 6th Gen (1990-2018)
0
Jan 25, 2012 11:38 AM
