Illuminated Door Sills
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
Illuminated Door Sills
So I have been looking and comparing the part numbers for this. So it gets really confusing. So far I have pinned down that the new part number for the illuminated door sills is PT9425318000 it used to be PT94253140. It would seem this is the front driver side and front passenger side. Then you need the hardware kit. I have found two, PT94253141HW and PT94253160HW. Can anybody help me out as to which one to pick? I am also assuming you only need one hardware kit? Also I didn't even know there were rear illuminated door sills lol.
Intermediate
Joined: Aug 2018
Posts: 273
Likes: 17
From: FL
So I have been looking and comparing the part numbers for this. So it gets really confusing. So far I have pinned down that the new part number for the illuminated door sills is PT9425318000 it used to be PT94253140. It would seem this is the front driver side and front passenger side. Then you need the hardware kit. I have found two, PT94253141HW and PT94253160HW. Can anybody help me out as to which one to pick? I am also assuming you only need one hardware kit? Also I didn't even know there were rear illuminated door sills lol.
Lexus Test Driver
Joined: Mar 2016
Posts: 9,510
Likes: 2,577
Why not just get this from eBay? Genuine Lexus dealer. I've ordered from this dealer multiple times and they're always lightning fast and professional. Get the whole kit at once and guaranteed to get the right parts:
https://www.ebay.com/itm/Lexus-OEM-F...2:pf:0&vxp=mtr
https://www.ebay.com/itm/Lexus-OEM-F...2:pf:0&vxp=mtr
Lexus Test Driver
Joined: Mar 2016
Posts: 9,510
Likes: 2,577
Oh and someone better jump on this.. a display set for even way cheaper .. brand new never installed =) https://www.ebay.com/itm/OEM-LIGHTED...3:pf:0&vxp=mtr
I wouldn't worry too hard about a "kit" all it is is a wire tap that taps into one wire.
I wouldn't worry too hard about a "kit" all it is is a wire tap that taps into one wire.
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
Why not just get this from eBay? Genuine Lexus dealer. I've ordered from this dealer multiple times and they're always lightning fast and professional. Get the whole kit at once and guaranteed to get the right parts:
https://www.ebay.com/itm/Lexus-OEM-F...2:pf:0&vxp=mtr
https://www.ebay.com/itm/Lexus-OEM-F...2:pf:0&vxp=mtr
Lexus Test Driver
Joined: Mar 2016
Posts: 9,510
Likes: 2,577
The hardware kit is simply a bag of zip ties and tape.
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
It’s just $17 not a big deal, but what I’m interested in is that the new part number is different to the one on that eBay link you just posted.
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Top 10 Reasons to Buy a Lexus TX 550h+ (& 3 Reasons to AVOID!)
Michael S. Palmer
Top 10 Lexus & Toyota Models of the 1990s RANKED!
Joe Kucinski
10 Great Toyotas That Could Have Been Lexus Models
Joe Kucinski
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
Lexus Test Driver
Joined: Mar 2016
Posts: 9,510
Likes: 2,577
Whatever part # the eBay link shows in its ad, just cross reference and use that.
Honestly i just threw the hardware in the trash when i installed these kits. the zip ties suck (way too large). The tape is just there to insulate your connections from rattling. i just used electrical tape lol. the sills themselves have a long wire you tap to the wiring harness which comes down the A-pillar. you just tap one wire. install takes less a few min at most. if i could buy these without the hardware kit i would. Any questions just call up SS Lexus in that ebay ad. those guys are extremely helpful. i wasn't even a customer once and they helped me on the phone look up parts and stuff.
Honestly i just threw the hardware in the trash when i installed these kits. the zip ties suck (way too large). The tape is just there to insulate your connections from rattling. i just used electrical tape lol. the sills themselves have a long wire you tap to the wiring harness which comes down the A-pillar. you just tap one wire. install takes less a few min at most. if i could buy these without the hardware kit i would. Any questions just call up SS Lexus in that ebay ad. those guys are extremely helpful. i wasn't even a customer once and they helped me on the phone look up parts and stuff.
Driver School Candidate
Joined: Sep 2018
Posts: 27
Likes: 0
From: TX
Door sills
here are the ones I just installed- they look great
Fronts
Rear
the invoice says for a 250 but it’s works with my IS350
The install video is on YouTube and it’s very straight forward- easy easy
Fronts
Rear
the invoice says for a 250 but it’s works with my IS350
The install video is on YouTube and it’s very straight forward- easy easy
Last edited by LEXSEX69; Oct 19, 2018 at 08:58 AM.
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
I ended up jumping on it and bought them. So I should just buy the T Taps and my own zip ties is what you’re saying and the actual light module comes with the scruff plates? I saw the install video so I’m not worried about the install itself.
Lexus Test Driver
Joined: Mar 2016
Posts: 9,510
Likes: 2,577
i have to buy a set for my newest car Ct200h. but i'll save that for another day. kind of a pricey part. i have other things i want to buy
Thread Starter
Pole Position
Joined: Apr 2018
Posts: 2,626
Likes: 459
From: GA
Yes it's just an LED that's built into the plates. you won't even see it from the backside. Very very simple part. just a single wire that taps into a the parking light wire. if you want i can pull off my factory installed scuff plate and take a pic of the backside and what wire it taps into. Go to home depot and buy a small bag of taps. or get them on amazon. Lexus use ones like this: https://amzn.to/2CuMI9t
i have to buy a set for my newest car Ct200h. but i'll save that for another day. kind of a pricey part. i have other things i want to buy
i have to buy a set for my newest car Ct200h. but i'll save that for another day. kind of a pricey part. i have other things i want to buy