Hi CL members.

I just got my CPO 2014 IS 250 RWD F-Sport 2 months ago and now looking for new wheels.
I am looking at 19x9.5 ET43 all around, with 255/35/R19 tires. Planning to have a 5mm spacer if it will help. Car is at stock height now.
I am wondering if this set up would fit in my car? Have anyone run this set up before? Would it rub?

Sorry for the noob question. I tried researching but couldn't find a definite answer, so hopefully I could get some answer from you guys. Thanks!

 

im running 19x8.5 front 19x10 rear on f sport lowering spring. no rub

 

I have 19X9 in the front and 19X10.5 with 235/35 and 275/30 and RSR Down Springs and have no rubbing. I used to have 245/35 on the front tires and had to roll my fenders because it rubbed. My RSR Downs actually sit a lot lower than any other RSR Down springs I've seen and I still don't rub anymore.

 

wheel offsets?

 

Thanks for all the replies. The reason I asked is because I am looking at a set of TE37 which is 19x9.5. I always like the look of it. I am pretty sure it will fit the rear, but looks like the front might not fit without modification...

 

9.5 in the front sounds like it would be difficult to make work. Widest I've seen on the front here is a 9.

 

+35 Front
+38 Rear

 

hello everyone. im new to this forum and also need some help.i just purchased a 2016 350 f sport awd. looking for winter wheels and wanted to know if this would fit with stock height. mainly concerned with front fitment
17x9" +35 or +25 offset.
Also what tire size should i be looking for. i know the dealership and tirerack suggest 225 45 17 all 4 corners.
thanks for any info provided.

 

Thanks! I'm on Swift springs which is about the same drop so I should have no problem with that setup too.. there's no rubbing even with a full car?