i ordered a pair of 5k d4s hid bulbs looking to replace my bulbs as one of the hid is losing colour as i was pulling the bulb out i noticed that it was connected and wired to the hdkit would i need a new adapter to connect to the new bulbs?

 

There is no need to replace anything else just the bulbs if you car equipped with HID from manufacture. Just disconnect the connectors frame each HID bulb and replace with your desire new HID color bulbs. Also, don't forget to wear cloves as you are doing this to prevent the oily fingers touching the and cause it to burn out more quickly.

Good luck and update us.

Thanks,
Ivnnln

 

Chance are if there wire attached to each bulbs there not oem hid. But and after market kit on a halogen head light. Which mean you bought the wrong bulbs. Oem your turn the connector to unlock and there latch that hold the bulb in place. Once those are unlocked the bulb comes rite out.

 

thanks for the reply i realized that i bought the ones for oem hid not aftermarket do u guys know what bulbs i would need to replace the aftermarket ones?

 

there should be marking on the bulb

 

Should be H11, but check the sylvania bulb replacement guide.

 

This is the replacement you need, this one is from XenonDepot but there are a handful of vendors that offer H11 HID bulb replacements.

http://www.kbcarstuff.com/H11-XenonD.../xt-h11-rb.htm

 

Just got an aftermarket HID kit the other day from VLEDS.com. The bulbs are H11. They install and come off the same way as an OE H11 halogens.

 

those look like the ones thanks alot guys!