taejin09

http://cgi.ebay.com/ebaymotors/2-x-6...ht_7365wt_1165
Would that work in 2006 IS250 fog light? I am scared of fuse blowing or brightness problems.

llamaboiz

yes it will work, of course you'll only use those to roll in at a car show~ those are NOT FOR DRIVING as they produce no usable light.

Snubbles

iTrader: (2)

why do you want to use LED for fogs?

papaalex

Use HID its brighter

Rudebwoy30

[QUOTE=llamaboiz;6039382]yes it will work, of course you'll only use those to roll in at a car show~ those are NOT FOR DRIVING as they produce no usable

But Arnt the fogs correlated with your low beams. So once you turn on lights those fogs will turn on as well. Is there a way to jus have fogs on only?

RastaRacer

iTrader: (5)

i wouldnt do it, i had led drl's in my acura tsx and they look good but the light output is weak, you may even get a error light on your dash bcuz the output is so low, just go with hid fogs, you can get a good set for under $75 bux.

llamaboiz

yes they will turn on BUT~ LED fogs are for 'show' only.

yes, a diy is somewhere on this forum.

chi123

iTrader: (12)

Here's the DIY for the fog lights: https://www.clublexus.com/forums/is-...ification.html

And don't do LED fog lights. It's better to just get an HID Kit from DDMTuning or HIDeXtra for about $40. Choose the 6000k color so it's the same as having LEDs but you'll get like 3 times more light than with LEDs.

Rudebwoy30

can i jus get a yellow bulb and still have the fogs on alone or do i need to get hid kit?

Jmags

iTrader: (1)

link to kit? I have one in my cart but want to make sure it's right, 2007 IS250

chi123

iTrader: (12)

http://www.ddmtuning.com/Products/Ap...Raptor-HID-Kit

Choose the 9006 type for fog lights. If you want to match any LEDs you may have then choose 6000k. And I don't think any harnesses or wiring is needed other than what comes with the kit.

chi123

iTrader: (12)

You can just get a yellow halogen bulb for about $14/pair. But if you want the fog lights to run without your low beams on, you'll have to do the DIY.

Jmags

iTrader: (1)

got any pics of it installed?