★★★★★ Official Work Owners Thread ★★★★★
#836
Driver School Candidate
Join Date: Jul 2013
Location: texas
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Still have some tweaking to do, need side and needs more low...but that awd vibration is no joke
Vskf 18x10 all around
Last edited by xkevinchux; 02-01-14 at 05:18 PM.
#838
Pole Position
#839
I have a 2012 IS250 F-Sport and will be lowered on RSR Sport I Coilovers. Will Work Emotion CR Ultimates fit in a square setup using 18x9.5 +38offset rims wrapped in 245/40/18 Yokohama S-Drive Tires without any rubbing on the fender or on the inner fender liner? Also, will the suspension setup clear when the tires and wheels are at full lock? I've tried searching for days and have yet to find another vehicle with the same setup I want to run. Thank you.
#840
Rookie
iTrader: (2)
Join Date: Jun 2013
Location: Bayarea, CA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Work wheel T-disk vs R-disk?
Hi,
I don't think this has been discussed on the forums before so I wanted to get some help.
Thinking of getting new work wheels but I noticed that on some of the newer wheels have a new disk type called T-disk. (I don't know if this is actually new, but it didn't exist as an option on my current Work wheels).
T-disk is also made for "Big brakes" but it has 5mm less clearance looking at the spec sheet.
Example: http://www.workwheelsusa.com/media/w...3_SPEC10A1.pdf
Is this compatible for our IS350s? Has anyone tried these on? My goal for my new setup is to add more lip in the front.
Thanks for the help!
Jay
I don't think this has been discussed on the forums before so I wanted to get some help.
Thinking of getting new work wheels but I noticed that on some of the newer wheels have a new disk type called T-disk. (I don't know if this is actually new, but it didn't exist as an option on my current Work wheels).
T-disk is also made for "Big brakes" but it has 5mm less clearance looking at the spec sheet.
Example: http://www.workwheelsusa.com/media/w...3_SPEC10A1.pdf
Is this compatible for our IS350s? Has anyone tried these on? My goal for my new setup is to add more lip in the front.
Thanks for the help!
Jay