★★★★★ Official Work Owners Thread ★★★★★
#797
thank you.
yes I need a lip. I want a complete lip kit. maybe the five axis front , and tom's for side and back.. or the vertex kit..
but it's difficult again, no one sells them here.
maybe i should go with ebay.com and buy fake parts.. shipping and import taxes will kill me.
yes I need a lip. I want a complete lip kit. maybe the five axis front , and tom's for side and back.. or the vertex kit..
but it's difficult again, no one sells them here.
maybe i should go with ebay.com and buy fake parts.. shipping and import taxes will kill me.
Last edited by DocFreud; 05-31-13 at 02:49 AM.
#800
Car shampoo on my wheels, always. If you wash your wheels regulary, you don't need strong chemical.
I rarely use those wheel cleaner solution spray as they tend to be too strong and quite expensive. Some of them smell very acidic.
I rarely use those wheel cleaner solution spray as they tend to be too strong and quite expensive. Some of them smell very acidic.
#801
Picking these up tomorrow morning but I'm a lil worried about fitment on my 2IS.. Anyone running a 19x10+30 up front? Rears are 19x11+35 which shouldn't be too difficult..
#803
Driver
iTrader: (3)
Excuse the iPhone photo. Build coming along nicely. Still fine tuning the stance, as its my daily. I'm running less and less camber each week, as I find the fortitude to do so, and ill be coming down 1/4" in the front this week.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.
#804
Can someone help me out I have a stock 2010 is250 and wanna buy these rims WORK Emotion 11R-FT
Matte Gray Silver (MGS) Finish
(2) 18x9.5 +15
(2) 18x10.5 +22
5x114.3*
These will fit without upgrading to coilovers , and what kind of tired should I put on these ?
Matte Gray Silver (MGS) Finish
(2) 18x9.5 +15
(2) 18x10.5 +22
5x114.3*
These will fit without upgrading to coilovers , and what kind of tired should I put on these ?
#805
Lexus Test Driver
iTrader: (11)
if you're on stock height, i must say those are gonna poke a lot! once you decide to lower, which i suggest you do, you're definitely need to stretch the tires, roll/shave fenders, relocate the fender tabs on the front, and still the front is gonna be pretty aggressive.
#806
What do you mean by poke, do you mean when I'm turning or is it gonna be too close to the fender so I should do suspension first before rims
#807
Thinking of getting some 18x8.5/9 +40/+35 and going with a finger gap dropped on Megan EZs. You guys think there will be an issue? I don't want to stretch/rub/crazy camber
#808
Excuse the iPhone photo. Build coming along nicely. Still fine tuning the stance, as its my daily. I'm running less and less camber each week, as I find the fortitude to do so, and ill be coming down 1/4" in the front this week.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.
#809
Lexus Test Driver
Excuse the iPhone photo. Build coming along nicely. Still fine tuning the stance, as its my daily. I'm running less and less camber each week, as I find the fortitude to do so, and ill be coming down 1/4" in the front this week.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.
Work Emotion CR Ultimate (GT Silver)
19x9.5 +25
19x10.5 +22
225/35 245/35 Hankook V12.
Megan LP/Megan Rear Camber kit.
24.5" to the fender up front, 24" in the rear.