Front lip question
I wish my lip still looked like that 
After a year it is pretty beat up with rock chips and a recent curb. I will probably just get the whole front resprayed and clearbraed.
Guys, PM me if you have any questions. It is pretty straight forward. You don't need the ramps, but it makes it a LOT easier. Make sure you hear the tabs click in place. To do this pull on the inside of the front lip where the tab is located and push on the slot of your front bumper.
After a year it is pretty beat up with rock chips and a recent curb. I will probably just get the whole front resprayed and clearbraed.Guys, PM me if you have any questions. It is pretty straight forward. You don't need the ramps, but it makes it a LOT easier. Make sure you hear the tabs click in place. To do this pull on the inside of the front lip where the tab is located and push on the slot of your front bumper.
Driver
Joined: Feb 2007
Posts: 183
Likes: 0
From: NJ
I just finished my install. Thanks to Vikdaddy the whole process took less than 30 min. It actually took me longer to drive up the Rhino Ramps and put on the jack stands than unscrew all 8 bolts and remove the OEM front bumper. Installing the GFX took no longer than 15 min once i removed it from the box. I can't believe anyone would pay someone to do this. It's easier than changing out the foglight bulbs. 
Thread
Thread Starter
Forum
Replies
Last Post