Notices
IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Lighting mods

Thread Tools
 
Search this Thread
 
Old Dec 28, 2009 | 09:32 PM
  #796  
gotis1000's Avatar
gotis1000
Rookie
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: AZ
Default

having dealt with a couple of companies, i would say go to v-leds. very good communication service shipping etc.

i would not deal with xenondepot/kbcarstuff. it's always a warning when a company goes by more than one name. i ordered stuff 1 week ago, no contact, no shipping, still processing, etc...

go to v-leds website and search 921 and it will show you several. i just got some from them but haven't installed yet, but i've installed a few other of their lights and they work great. it looks like they are updating most of their products to 0.5 w LEDs but they still have the older products with dimmer leds.
Reply
Old Dec 29, 2009 | 11:47 AM
  #797  
Jetfire's Avatar
Jetfire
Royale with cheese
15 Year Member
iTrader: (3)
 
Joined: Jul 2009
Posts: 4,098
Likes: 3
From: Vancouver
Default

Originally Posted by gotis1000
having dealt with a couple of companies, i would say go to v-leds. very good communication service shipping etc.

i would not deal with xenondepot/kbcarstuff. it's always a warning when a company goes by more than one name. i ordered stuff 1 week ago, no contact, no shipping, still processing, etc...


go to v-leds website and search 921 and it will show you several. i just got some from them but haven't installed yet, but i've installed a few other of their lights and they work great. it looks like they are updating most of their products to 0.5 w LEDs but they still have the older products with dimmer leds.
you do realize it was christmas and a lot of people have been on vacation/stores closed, right?

I, along with many many people on this forum(outside the forum too) can vouch for steve and xenondepot. pm steve, he usually replies pretty quickly.
Reply
Old Dec 29, 2009 | 12:08 PM
  #798  
gotis1000's Avatar
gotis1000
Rookie
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: AZ
Default

Originally Posted by Jetfire
you do realize it was christmas and a lot of people have been on vacation/stores closed, right?

I, along with many many people on this forum(outside the forum too) can vouch for steve and xenondepot. pm steve, he usually replies pretty quickly.
Well definitely certain stores close down over the holidays. I've PM'd steve in the past too and i usually get a quick response as well, but the difference between good and bad business in my opinion is consistent and predictable service.

I ordered several days in advance of the holidays, was given no warning about anything being shut down over the holidays, and even now my order is still "being processed". My experience may be unique but I think it qualifies as an example of bad service. I contrast that experience with my recent purchase from v-leds and heck even from Amazon (I ordered putco 194 360s off of Amazon for cheaper than at kbcarstuff/xenondepot and with 1 day shipping.. both companies processed and shipped order in under 24 hours... similar good experience with HID extra).

I'm sure they are friendly and great people but that doesn't equal good customer service. Online shopping involves a lot of trust and communication, and these experiences don't help.

EDIT: received full refund without questions from Steve. Wish it would have worked out but i guess it wasn't meant to be.

Last edited by gotis1000; Dec 29, 2009 at 12:19 PM.
Reply
Old Dec 30, 2009 | 01:09 PM
  #799  
santacruz's Avatar
santacruz
Driver
 
Joined: Jul 2008
Posts: 152
Likes: 0
From: florida
Default

Just replaced a bunch of my lights with some from v-leds. I'll take some pictures when it's darker out tonight but I am very happy so far! I replaced my interior with blue led's, puddle lights with the 4led flank bulb, and my city lights with white. Everything looks great! I originally planned on putting the white ones for the city lights in my reverse lights and a set of the UV(purple) in the headlights but one of the UV ones is busted so I have to get that straightened out. Sucks because of how much of a pain in the *** it is to replace the city lights. The passenger side is easy but damn, the drivers side is a ***** unless you have tiny little hands and some very small bright flashlights.
Reply
Old Dec 30, 2009 | 04:09 PM
  #800  
OlivrTwizt's Avatar
OlivrTwizt
Driver School Candidate
 
Joined: Oct 2009
Posts: 20
Likes: 0
From: Australia
Default

I don't know if it's been done before, but I now have a dual-mode dome light setup in my 2IS using the stock bulb positions, and some LEDs from V-Leds.com

Basically, in the front dome light I have 2x high power white T10 bulbs on the outer holders, and in the middle, a high power blue blub.

In the rear, the forward bulb is a high power white festoon, and in the rear clip, a high power blue bulb.

Now, when I unlock the car using the remote fob or by waving my hand over the door handle, the interior is bathed in a subtle blue light, clearly visible from the outside. When the door is actually opened however, the interior changes to a bright white, and then when the doors are closed, it goes back to a nice blue.

It's still light outside so I'll try and snap a clip tonight, but in my garage it does look quite cool. If only they had some highpower purple LEDs, that'd be pimp!
Reply
Old Dec 30, 2009 | 09:56 PM
  #801  
santacruz's Avatar
santacruz
Driver
 
Joined: Jul 2008
Posts: 152
Likes: 0
From: florida
Default

^they do have purple, I had a set to put in but one was DOA so I have to wait for a replacement. VLED's btw was very prompt to respond to my email about the defective bulb and has already sent me out a replacement, same day that I got the original delivery. I think it's nice that they are actually going to send my replacement before they get the defective one back. Hard to get service like that anymore.

Last edited by santacruz; Dec 30, 2009 at 10:01 PM.
Reply
Old Dec 30, 2009 | 10:31 PM
  #802  
OlivrTwizt's Avatar
OlivrTwizt
Driver School Candidate
 
Joined: Oct 2009
Posts: 20
Likes: 0
From: Australia
Default

Originally Posted by santacruz
^they do have purple

They're not the highpower purple ones I'm after...
Reply
Old Jan 3, 2010 | 08:41 PM
  #803  
isthrizzy's Avatar
isthrizzy
Lead Lap
 
Joined: Apr 2004
Posts: 677
Likes: 1
From: CA
Default

I bought 5 LED panels from Nigel. I put 3 in the front, 2 in the rear. They are so damn bright it's crazy. When you open the door and the other 2 lights in the front come on, it is way way too bright. I have to remove 2 of the panels and replace them with smaller ones that I have.

I am amazed at how bright these panels are, it blindingly bright.
Reply
Old Jan 5, 2010 | 08:08 PM
  #804  
mc501s's Avatar
mc501s
Driver School Candidate
 
Joined: Oct 2008
Posts: 26
Likes: 0
From: CA
Default

Originally Posted by gotis1000
having dealt with a couple of companies, i would say go to v-leds. very good communication service shipping etc.

i would not deal with xenondepot/kbcarstuff. it's always a warning when a company goes by more than one name. i ordered stuff 1 week ago, no contact, no shipping, still processing, etc...

go to v-leds website and search 921 and it will show you several. i just got some from them but haven't installed yet, but i've installed a few other of their lights and they work great. it looks like they are updating most of their products to 0.5 w LEDs but they still have the older products with dimmer leds.

I am with you man. I put in the order on the 28th and still in process status. Got a reply back and said it is process by Putco. The web site clearly says ship within 24 to 48 hours. Hmmm?
Reply
Old Jan 19, 2010 | 12:20 AM
  #805  
RickJames1's Avatar
RickJames1
Lead Lap
 
Joined: Jan 2009
Posts: 443
Likes: 0
From: hawaii
Default

ok well i need help now!! i took my mirror off and now i dont know how to pop it back on
Reply
Old Jan 22, 2010 | 03:10 PM
  #806  
GoGators's Avatar
GoGators
Rookie
 
Joined: Jan 2010
Posts: 90
Likes: 0
From: Florida
Default

Just finished doing my puddle lights. LEDs look so good against Smokey Granite Mica! The mirror is easy, Look from underneath to find the top hooks, the support the white plastic thingy from behind with your index finger and press each clip with your thumb. It takes way more force to clip it in than the plastic gears can resist against back driving. Hope you haven't been driving with your mirrors hanging off for 3 days!!!
Reply
Old Jan 26, 2010 | 08:04 AM
  #807  
supaIS350's Avatar
supaIS350
Lead Lap
 
Joined: Jul 2006
Posts: 741
Likes: 0
From: NOLA
Default

Does anyone know anything about these led interior bulbs from Sewell? Comes with the clear door lens also for $98. I was thinking about getting these and was wondering.

http://www.sewellpartsonline.com/par....asp?id=203788
Reply
Old Jan 26, 2010 | 11:36 AM
  #808  
xuningshen's Avatar
xuningshen
Lexus Test Driver
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,272
Likes: 0
From: Socal
Default

^^ not too bad of a deal. the clear side markers are 15 bucks each alone... if you order everything separately and order off v-led, you might be able to save yourself 20 bucks or so, but that will save you the hassle.
Reply
Old Jan 26, 2010 | 11:38 AM
  #809  
xuningshen's Avatar
xuningshen
Lexus Test Driver
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,272
Likes: 0
From: Socal
Default

Originally Posted by RickJames1
ok well i need help now!! i took my mirror off and now i dont know how to pop it back on

you have to push it pretty hard. look at the back of the mirror, see the clips, look at where your putting the mirror back on, and see where the clips go, and try and wedge it on .it'll make cracking noises but your not breaking it
Reply
Old Feb 25, 2010 | 09:15 PM
  #810  
rtk126's Avatar
rtk126
Driver School Candidate
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: MD
Default

Okay heres a question for anyone who can help me out - I just did the puddle lamp mod a few days ago. I went with blue wedge LED's from V-LED. They look perfect, especially how they match the scuff plates. The problem: Before the mod, the side view mirrors would tilt down whenever the car was in reverse (for visibility). Since I installed the LED's, it doesn't do that anymore :-(

Any help/advice/suggestions would be greatly appreciated!

Thanks.
Reply



All times are GMT -7. The time now is 11:23 PM.