Notices
IS - 1st Gen (2001-2005) Discussion about the IS models up to the 2005 model

Taking Off Headlights

Thread Tools
 
Search this Thread
 
Old Nov 28, 2001 | 12:09 PM
  #1  
AltezzaBlue0122's Avatar
AltezzaBlue0122
Thread Starter
Driver School Candidate
 
Joined: Nov 2001
Posts: 5
Likes: 0
From: Boca Raton, FL
Post Taking Off Headlights

Hey everyone, i'm new to this board, and to the site, cause i just got my IS300. I was changing my orange turn signals in the front and i dropped a bulb into the small turn-signal chamber. I tried EVERYTHING but couldn't get it out. Could someone please tell me how to take the headlight out so i can get the bulb out? Thanks
Reply
Old Nov 28, 2001 | 01:40 PM
  #2  
SophieSleeps's Avatar
SophieSleeps
Pole Position
 
Joined: Mar 2001
Posts: 238
Likes: 0
From: Massachusetts
Default

hahaha...

You have to take off the bumper...
i think there are 10 bolts...
don't forget 2 silver bolts between the bumper the quarter panel. These are hidden...They're right on the edge. to get to these, you'll have to peel the wheel well back a little.


The headlight is held in by 2 gold nuts.
The front is held in by a black clip.
You'll have to push 2 flathead screwdrives in to release the clips and pull out.

You'll see when you do it.
Reply
Old Dec 2, 2001 | 08:24 PM
  #3  
ONYXIS300's Avatar
ONYXIS300
Driver
 
Joined: Sep 2001
Posts: 121
Likes: 0
From: NJ
Default Re: Taking Off Headlights

Originally posted by AltezzaBlue0122
Hey everyone, i'm new to this board, and to the site, cause i just got my IS300. I was changing my orange turn signals in the front and i dropped a bulb into the small turn-signal chamber. I tried EVERYTHING but couldn't get it out. Could someone please tell me how to take the headlight out so i can get the bulb out? Thanks
ITS BEEN A WHILE NOW DID YOU TAKE THE BUMPER OFF TO GET TO THE LIGHT?
Reply
Old Dec 2, 2001 | 11:29 PM
  #4  
TeCKis300's Avatar
TeCKis300
Driver
 
Joined: Sep 2001
Posts: 144
Likes: 13
From: California
Default Re: Taking Off Headlights

Originally posted by AltezzaBlue0122
Hey everyone, i'm new to this board, and to the site, cause i just got my IS300. I was changing my orange turn signals in the front and i dropped a bulb into the small turn-signal chamber. I tried EVERYTHING but couldn't get it out. Could someone please tell me how to take the headlight out so i can get the bulb out? Thanks
LOL...I did the EXACT same thing. Almost pissed in my pants when that orange bulb dropped in there. And yes...had to take the bumper / headlight off to get it out. Should have taken off the bumper in the first place to change that bulb.
Reply
Old Dec 3, 2001 | 08:28 AM
  #5  
bcc002's Avatar
bcc002
Pole Position
 
Joined: Sep 2001
Posts: 291
Likes: 0
From: California
Default

lol lets go bump long dead posts to the first page....
Reply
Old Dec 4, 2001 | 12:09 PM
  #6  
BlueIS0122's Avatar
BlueIS0122
Driver School Candidate
 
Joined: Dec 2001
Posts: 4
Likes: 0
From: Boca Raton, FL
Default

i tried getting the headlight out, but after taking off the bumper and EVERY SINGLE screw holding in the headlight, i couldn't unclip it without breaking the damn things. so i put everything back to normal and took the car back to the lexus dealership. they were more than willing to take the bulb out for me. and the best part is, it was FREE!!! lol. thanks for your help anyway everyone!
Reply
Old Dec 4, 2001 | 12:15 PM
  #7  
BlueIS0122's Avatar
BlueIS0122
Driver School Candidate
 
Joined: Dec 2001
Posts: 4
Likes: 0
From: Boca Raton, FL
Default

one more thing i forgot to mention: BlueIS0122 = AltezzaBlue0122. sorry for the mix-up.
Reply
Old Dec 4, 2001 | 03:53 PM
  #8  
LexyISherName's Avatar
LexyISherName
Driver School Candidate
 
Joined: Oct 2001
Posts: 36
Likes: 0
From: southern cali 626
Default

haha thats so funny...i could imagine your expression when that happened.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
geribac
IS - 1st Gen (2001-2005)
2
May 29, 2017 07:44 PM
twoloose
IS - 1st Gen (2001-2005)
4
Jan 29, 2012 02:32 PM
lx470man
IS F (2008-2014)
1
Oct 25, 2008 11:39 PM
titino
Lighting
4
Jul 4, 2006 12:38 AM
jersey1
SC - 1st Gen (1992-2000)
3
Jan 16, 2003 11:23 PM




All times are GMT -7. The time now is 05:36 AM.