2008 RX400h Service menu :)
Driver School Candidate
Joined: Sep 2017
Posts: 15
Likes: 1
From: CO
You need to use the headlight trick to get back into the second level of the service menu.
Change the vehicle type until it says "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then press set and exit the menu.
Everything should be back to normal. Never go into that menu again! It is evil!
Change the vehicle type until it says "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then press set and exit the menu.
Everything should be back to normal. Never go into that menu again! It is evil!
Same problem.
Driver School Candidate
Joined: Sep 2017
Posts: 15
Likes: 1
From: CO
SOLVED: We swapped out the display unit, the one above the radio/DVD and the 'scrambled' buttons and display problem was resolved. I was surprised, but it did solve the problem. The button info and screen stuff is NOT stored in the map nav DVD unit or the computer but in the display unit. Go figure.
Driver School Candidate
Joined: Jan 2022
Posts: 2
Likes: 0
From: Ulaanbaata
You need to use the headlight trick to get back into the second level of the service menu.
Change the vehicle type until it says "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then press set and exit the menu.
Everything should be back to normal. Never go into that menu again! It is evil!
Change the vehicle type until it says "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then press set and exit the menu.
Everything should be back to normal. Never go into that menu again! It is evil!
Hello, my car has same problem. I couldn't change the trip information type. Could you please send me the video of the changing 900N4WD. 😉
My email address: bbr_info@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
LA Wheel
LS - 3rd Gen (2001-2006)
19
Feb 9, 2022 09:21 AM
