Well, I've had the GX for just over a week Ordered LEDs from VLEDs- had great luck with them on my 4Runner. To start the LED upgrade I did all passenger compartment lighting including:

- dome / maps lights
- vanity mirror lights
- door/puddle lights







Then did the running board lights

 

Which LED lights did you use? These seem very bright

 

The two front map lights and vanity lights are: WHITE HIGH POWER 360° 14 LED 5K NATURAL WHITE https://www.vleds.com/shop-bulb-numb...194-14-ll.html

All the others are: WHITE HIGH OUTPUT 360° 26 LED 5K NATURAL WHITE https://www.vleds.com/shop-bulb-numb...194-26-ho.html

 

Might I recommend NOT upgrading the vanity mirror lights to daylight LEDs (or LEDs at all). Your significant other will not be happy.

 

Hmmm, good point.

 

These are bright wow!

My puddle lights are not too bright so thinking of getting new bulbs. I think I have Yorkim LEDs in them.

 

Are there any replacement for LEDs in the pedal area ?

 

Only if you want to solder on the replacements. They're small LEDs and I broke off the one in the passenger footwell area and need to solder it back on :/

 

Not many replaced these as they are not common bulb.

 

I have become expert in soldering after doing alot of mods

Any link to what LED to buy to solder to?

 

Lol is it too blindingly bright for the vanity mirror lights when done ? OP how many bulbs did you end up using in all ?

 

Damn those are bright!

 

Sooo, since I have a few amber VLED 194s from my 4Runner, my next step was changing the side parking/marker lights. Much to my surprise- I cannot for the life of me find the socket. What am I missing?

 

front or rear with this or both?

 

I was attempting the front side markers . .