GX - 2nd Gen (2010-2023) Discussion topics related to the 2010 + GX460 models

"What did you do to your..." thread?

Old Nov 20, 2016 | 07:32 PM
  #1  
Orrin's Avatar
Orrin
Thread Starter
Driver School Candidate
 
Joined: Nov 2016
Posts: 10
Likes: 1
From: Wisconsin
Default Received great information

have been mostly lurking and reading lots of earlier posts which has lead me to do a few things.
I installed a trailer hitch, put on the Draw Tight I ordered from Amazon. The info here helped me decide which one to buy.

I noticed that the coolant bottle was empty when I removed the forward engine cover. Checking here I soon found out that it is best to use use Toyota Super Long Life coolant. My Lexus dealer was great and gave me trade price. I filled the over flow bottle and added maybe a pint to the radiator. Have not seen any leaks or any unusal exhaust.

I removed the air filter from the air pump and installed the external air filter. My old filter was like new, but why take a chance. I found out that you can make a new filter out of Scotch Brite pads. It's very easy to cut with a kitchen shears, but I like the external filter better. Thanks for the great air pump threads.

Last I topped up the ps fluid, only took a couple OZ's.

Orrin
Reply

Popular Reply

Jan 18, 2024, 09:38 PM
graybadge's Avatar
graybadge
Driver
Liked
Loved
Top Answer: 1
 
Joined: Dec 2021
Posts: 55
Likes: 69
From: WA
Default

Today was a good day. I paid off the GX and retired from work.
Old Nov 20, 2016 | 07:37 PM
  #2  
Orrin's Avatar
Orrin
Thread Starter
Driver School Candidate
 
Joined: Nov 2016
Posts: 10
Likes: 1
From: Wisconsin
Default

PS, I almost forgot. I installed 4 new tires, Michelin LTX Defender M&S. I think I will like them, I'll comment later when I have put some miles on them. Parts guy said they are quiet.

Orrin
Reply
Old Mar 24, 2017 | 07:54 PM
  #3  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Default "What did you do to your GX today" thread?

It seems like every car forum I've to has this type of thread in the sticky section. It's kinda fun to read up on little things members did to their car that aren't actual mods. Wonder why this forum doesn't have one.
Sorry if that kind of thread isn't allowed here (I see it in the Gen1 forum though).

Last edited by bbqsoup; Apr 4, 2017 at 10:11 AM.
Reply
Old Mar 24, 2017 | 08:20 PM
  #4  
11GX460's Avatar
11GX460
Pit Crew
 
Joined: Mar 2014
Posts: 196
Likes: 29
From: EastCoast
Default

Let's start with you, BBQ.
Reply
Old Apr 4, 2017 | 10:10 AM
  #5  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Talking

Originally Posted by 11GX460
Let's start with you, BBQ.
Maybe the Mod can help change the thread title to add GX 460

LOL...ok. It has to start somewhere. We all love our truck so let's see what you've done to it. Anything is good, even better with pictures.

My 2010 didn't come with chrome tip and I like the look of the GX with it so I got one from a local Toyota dealer, around $43, Part# PT18A-89090-EK





Even the wife complimented on how it looks nicer with the chrome tip LOL.
Reply
Old Apr 4, 2017 | 10:20 AM
  #6  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Default

Last week I wanted to test to see how much gas is left after the light was on so I drove it down to 5 miles left and filled it up just a a bit over 20 gallons. So with a 23 gallons tank, I got maybe 2.5 gallons left.

Reply
Old Apr 4, 2017 | 01:30 PM
  #7  
GoHuskers's Avatar
GoHuskers
Racer
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2006
Posts: 1,727
Likes: 168
From: Nebraska
Default

I like it. Will take pics for little things.....
Reply
Old Apr 4, 2017 | 03:44 PM
  #8  
Acrad's Avatar
Acrad
CL Community Team
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2017
Posts: 9,280
Likes: 3,948
From: USA
Default

bbqsoup: I guess I should have shopped around more. I made mistake of assuming eBay deal from dealer in Scottsdale. Oh well... an extra $10 for the same tip.

This is one I purchased.

Reply
Old Apr 4, 2017 | 04:56 PM
  #9  
tecman's Avatar
tecman
Lead Lap
 
Joined: Aug 2013
Posts: 4,843
Likes: 1,388
From: GA
Default

Today is garbage pick up day. My neighbor is selling their house so curb appeal is important. The neighbor put their garbage can on one side of of my driveway and I put mine on the other side. I back my GX into a 2 car garage with a separation so I am backing into a single garage. I hit my garbage can and it scratched my GX along with a slight straight line 2 inch dent Hard to see with pics, but you can see the reflection is doubled where it is in the red pic. Should be able to have it massaged out.

Two obstacles, don't hit the two walls while backing into a short driveway.... FAIL


Reply
Old Apr 4, 2017 | 05:56 PM
  #10  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Default

that's sucks tecman. Hope you're able to buff it out. I found that with darker color, touchup paint works better than light. I bought a small bottle of touchup and clear from automotivetouchup.com and it matched well.
I also had a couple of dent remove from the hood too. Have you thought about getting one of the tool like those dent removal guy and try it yourself? Since yours are at the end it may be worth a try.

My hood before and after.
Reply
Old Apr 4, 2017 | 06:41 PM
  #11  
tecman's Avatar
tecman
Lead Lap
 
Joined: Aug 2013
Posts: 4,843
Likes: 1,388
From: GA
Default

Dent removal is an art and practice is needed. Not my thing and expensive tools are best along with experience
Reply
Old Apr 5, 2017 | 07:24 AM
  #12  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Default

Originally Posted by Acrad35751
bbqsoup: I guess I should have shopped around more. I made mistake of assuming eBay deal from dealer in Scottsdale. Oh well... an extra $10 for the same tip.

This is one I purchased.

Still a good price compare to the dealer's price . Have you installed it yet?
Reply
Old Apr 5, 2017 | 03:22 PM
  #13  
Acrad's Avatar
Acrad
CL Community Team
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2017
Posts: 9,280
Likes: 3,948
From: USA
Default

Originally Posted by bbqsoup
Still a good price compare to the dealer's price . Have you installed it yet?
It isn't supposed to get here until after I have left town for my cabin on Friday....so I guess it will have to wait until Monday.

EDIT: Damage shots are always painful to look at
Reply
Old Apr 6, 2017 | 10:15 AM
  #14  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 606
From: San Jose, CA
Default

I ordered an air filter online part# 17801-38051 which is listed for 4runner, gx and FJ.
What I got was part# 17801-yzz3. Looks the same, fit the same except the yzz3 doesn't have the white foam pad like the original. The seller (a toyota dealer) said the yzz3 is the new part and Toyota removed the pad. Without it, it seems less restrictive and probably gave half a goat more in power lol.
Anyone knows what's the extra foam pad is for?


Reply
Old Apr 6, 2017 | 02:23 PM
  #15  
Acrad's Avatar
Acrad
CL Community Team
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2017
Posts: 9,280
Likes: 3,948
From: USA
Default

The other day swapped out the cabin filter in the glove box... what does that take like 60 seconds?


Put in Weathertech mats front to rear cargo area

Bought a BumpStep for when the hitch isn't on there... let others crash into that. I have some Weather LP frame covers but plates haven't arrived yet. In WA state new plates are always issued with new owners unless a vehicle is gifted IIRC.

Picked up the stock cargo area net cheap off of eBay. Also put on the OEM crossbars and OEM Chrome exhaust tip.



Last edited by Acrad; Apr 6, 2017 at 04:35 PM.
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:05 PM.