When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- You only need the bottom holes of the fog light to mount on the bumper. If your trying to piece meal this off of ebay, this may save you a few bucks.
- I routed my wire harness across the bottom of the front bumper. This gave me enough slack across both ends.
- I temporarily hooked up power to the ignition. I may go back and link it to when the parking/low beams are on. See this thread for info: https://www.clublexus.com/forums/gs-...g-diagram.html
Enough writing, here are some pics:
Yes its a bug and I need to clean my car!
Driver side installed!
Passenger side exposed:
Passenger installed:
Lots of space once the plastic coverings are removed:
- You only need the bottom holes of the fog light to mount on the bumper. If your trying to piece meal this off of ebay, this may save you a few bucks.
So other than the JDM fogs, which other lights fits in there? I also read that some guy used fogs from a Toyota Venza to fit in that spot.
How about the harness, which one did you used? And where did you mount the switch?
Venza, Camry, corolla, etc. They all use the same fog lamp.
For the wire harness I went semi fancy and got the harness that uses a remote control to activate. I was too lazy to run a switch into the cabin but looking back at it I could of done that easily also.
Do a search on eBay on remote control fog light harness and you will find the one I used.
Venza, Camry, corolla, etc. They all use the same fog lamp.
For the wire harness I went semi fancy and got the harness that uses a remote control to activate. I was too lazy to run a switch into the cabin but looking back at it I could of done that easily also.
Do a search on eBay on remote control fog light harness and you will find the one I used.
Awesome thanks for the info!
Originally Posted by Nigel-JDMParts
F-Sport with Fog Light is looking good.
If you are looking to save some money, the OEM STYLE fog lamp housing from us will fit on the NEW GS F-Sport and it will save you some money.
Option 4 & 5 come with OEM STYLE fog lamp housing.
I'm thinking of putting in HID bulbs for the fogs, are OEM style fog lamp housing able to withstand the extra heat? What about the harness? Are those made to withstand the extra voltage required for a HID setup?
Finally if I choose option 2, what kind of switch does it come with? Do you have a pic? Thanks.
I'm thinking of putting in HID bulbs for the fogs, are OEM style fog lamp housing able to withstand the extra heat? What about the harness? Are those made to withstand the extra voltage required for a HID setup?
My question also. Since I am thinking about doing HID. Do I really need the Lexus fogs or is the OEM style good enough?
...I'm thinking of putting in HID bulbs for the fogs, are OEM style fog lamp housing able to withstand the extra heat? What about the harness? Are those made to withstand the extra voltage required for a HID setup?
Finally if I choose option 2, what kind of switch does it come with? Do you have a pic? Thanks.
What extra heat? HID bulbs use less power and have lower wattage.
I'm thinking of putting in HID bulbs for the fogs, are OEM style fog lamp housing able to withstand the extra heat? What about the harness? Are those made to withstand the extra voltage required for a HID setup?
Finally if I choose option 2, what kind of switch does it come with? Do you have a pic? Thanks.
I think they will do fine, but of course lexus parts will have better quality for sure.