2007 GS 350 Door Hinge Problem
#47
Driver School Candidate
I have a 2006 GS300 in the UK and have owned it for 6 months. Both rear doors have been stiff since Day #1, but after reading this thread I drilled the holes, lubed things, and things are already better after a couple of days. Thanks very much to the guys who posted regarding the drilling of the hinges.
The following 2 users liked this post by xpc316e:
samsonn25 (06-24-19),
ServerTech (10-13-19)
#48
Driver School Candidate
Join Date: Oct 2019
Location: oh
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I fixed my LS460 passenger door with this method
You have to drill through all the way through the outer part and because drill tip is not flat that means automatically you will drill some part of the inner pin. Not sure if the inner pin is hollow but after I drilled into it there still seems alot of metal behind it.
i actually had purchased hinges and was going to install them but I tried this method first. I am glad I did.
thanks everyone
Thread
Thread Starter
Forum
Replies
Last Post