When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My Concept One wheels have arrived. 20x10 et40 all around. Sumitomo 255/35 for the front. Waiting on the rears to come in. Will run 275/30 for the rear. I'll likely swap these front tires for a 30 series set but I'll definitely want to have my tire pressure sensors before running lower profile tires. I'm also thinking of wrapping the lips in black chrome, which I have laying around. But too soon to tell.
My Concept One wheels have arrived. 20x10 et40 all around. Sumitomo 255/35 for the front. Waiting on the rears to come in. Will run 275/30 for the rear. I'll likely swap these front tires for a 30 series set but I'll definitely want to have my tire pressure sensors before running lower profile tires. I'm also thinking of wrapping the lips in black chrome, which I have laying around. But too soon to tell.
You'll most likely rub on turns since that front tire is way over-spec. 255/30 might get rid of it but since you're running a 10' in the front you'll probably get some still.
Just picked up a GS 350 awd and found some wheels on CL. What do you guys think? Also they are 20x10 with +45 offset with 255/35/20 tires would these work? New to custom wheels but need something other then these!
You'll most likely rub on turns since that front tire is way over-spec. 255/30 might get rid of it but since you're running a 10' in the front you'll probably get some still.
You were right. Test fitted them and I have a very slight rub on turns. But only slightly. And that was coming down an off ramp at about 35 while turning. No rubbing on the rear. I'm dropped F-1"/R-1.5" for now. I definitely want a lower profile tire for the front but not until I get my tire pressure sensors on.
My new set of Weds Maverick 607d will be arriving this month if anyone wants a new set.. bought it for my car, but they take too long to arrive and I want something else lol
just wanted to share one of my favorite wheels getting fitted on my GS350. I have yet to see one with CE28's and SGM with mag blue is an amazing combo in my opinion. Hope you guys like. Thanks VDMtom and everyone on clublexus for the inspiration.
I know fitting a 20x10.5 is going to be hard, but i see alot of guys fitting a 10.5 upfront. But im wondering what offset I can fit? the wheel offset that is avaliable is 15-45. I do see alot of the 3gs guys running a 20x10.5 +35 - +45 in the rear. Would a square setup of 20x10.5 +35 all the way around be okay?
what tire specs would i be able to run?
Rear fenders have already been shaved, and nothing has been done to the front fenders. Any input would help!
just wanted to share one of my favorite wheels getting fitted on my GS350. I have yet to see one with CE28's and SGM with mag blue is an amazing combo in my opinion. Hope you guys like. Thanks VDMtom and everyone on clublexus for the inspiration.
