When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hey guys am using Torque Pro on my phone to scan my car's computer to clear a P0420 code but Evaporative sys is saying incomplete.... do i need to do something to get it to complete or maybe replace something? Any input will be appreciated
That that just means the monitor checks the ecm does for the evap system has not completed yet. It does a series of tests under various conditions to make sure everything is working properly, and since you cleared the codes the ecm has to perform all the various monitor checks again. It should change to complete in a day or so depending on how much you use the car (or fail which will cause the check engine light to come on and a code to be stored).
That that just means the monitor checks the ecm does for the evap system has not completed yet. It does a series of tests under various conditions to make sure everything is working properly, and since you cleared the codes the ecm has to perform all the various monitor checks again. It should change to complete in a day or so depending on how much you use the car (or fail which will cause the check engine light to come on and a code to be stored).
Thanks for your time! What worries me is its saying incomplete for the pass 3 weeks! I drive at least 200 miles a week... Is that not enough driving/time for the test to complete?
Thanks for your time! What worries me is its saying incomplete for the pass 3 weeks! I drive at least 200 miles a week... Is that not enough driving/time for the test to complete?
15 to 20 miles should do it, what have you done to fix code P0420 besides trying to erase it? I dont know this Iphone App readers Crap you guys use, but Get a good Code reader Not a Phone to do your diagnostics..
and what ever you do dont listen to Krisch
How much gas have you had in the tank when driving? and what kind of driving are you doing?
Filled up the tank 3 times in the last month! i always get premium gas from chevron. my driving is 60% city and 40% highway. on cold days i also let the car idle for about 3-5 minutes depending on the day
15 to 20 miles should do it, what have you done to fix code P0420 besides trying to erase it? I dont know this Iphone App readers Crap you guys use, but Get a good Code reader Not a Phone to do your diagnostics..
and what ever you do dont listen to Krisch
was getting P0430 codes couple times a week so i thought i might have an exhaust leak.. replaced the 2 gaskets between the cat and the O2s and now am getting P0420 and P0430. took my car to a local MIDAS to check for exhaust leak but they couldn't find any, they used their scan tool and said i need to replace all 4 O2s. they quoted me $1100 labor included. i feel like thats too much but hey what do i know
Got the app from the play store. Just type Torque Pro! Then u have to buy a device called " Bluetooth ELM 327" from Amazon! It's very handy and you can diagnost and clear CEL in seconds. It's all wireless
that's what am doing! ordered all 4 o2 from amazon for $210 shipping included
Nice. If i remember, the one that gave me the most trouble was bank 2 sensor 1? Closest to the firewall. Had to soak in PB for a few hours. Just take your time and dont throw your tools.