Vsc, abs, vsc off lights on
#46
I have been dealing with this same issue. I searched and there are SO many threads it's hard to find the right steps. I downloaded the PDF from one of the threads so I'll just attach it here. One more thread with the PDF in it will make it easier to find. The procedure to read the codes is section 2. Sensor signal check.
The reset procedure is one of the first section that talks about not having the handheld tool
The reset procedure is one of the first section that talks about not having the handheld tool
#47
Driver School Candidate
Join Date: Sep 2018
Location: CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Either you need new abs sensors on each wheel or your tires/wheels are bad or you just need to reset the abs/vsc -- do it under the hood. if you can find the steps then kudos if not just pm me and I can look and see where i have it. You use the diag port under the hood to clear it.
#48
Presumably, the system depends on all 4 wheels rotating in a predictable way, to what the system is expecting. So if one of the wheels/tires is out-of-round, or has too small or large of a rotating distance, the system might believe that one of the sensors is always bad, and disables the system (until the out-of-sync item is fixed).
#49
Hello team !! I have 1998 lexus gs400 and i installed some megan racing coilovers 2 weeks ago yesterday i picked up a set of satggered wheels 20x8.5 and 20x10 when u ajusted my coilover to the way i wanted it the vsc, abs, vsc off light came on .... Doesn any one now why this happens ? If u could please help me out thanks guys have a good day
I replaced the Altenator, and all the lights never come back on.
I hope this help.
Thread
Thread Starter
Forum
Replies
Last Post