Notices
GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Stalling or almost stalling?

Thread Tools
 
Search this Thread
 
Old Nov 4, 2009 | 02:06 PM
  #1  
es3doubleO's Avatar
es3doubleO
Thread Starter
Driver
 
Joined: Aug 2004
Posts: 128
Likes: 0
From: British Columbia
Default Stalling or almost stalling?

Has anybody run into any cases where their car dies in traffic, or almost dies in traffic? This has happened to me twice in the last 2 months but its not consistently.
Reply
Old Nov 4, 2009 | 02:09 PM
  #2  
Tony2Carte's Avatar
Tony2Carte
Rookie
 
Joined: Sep 2008
Posts: 67
Likes: 0
From: GA
Default

I just put a post out yesterday with a similar question. Is it jumping or the engine shaking??? I'm still researching my issue.
Reply
Old Nov 4, 2009 | 02:12 PM
  #3  
es3doubleO's Avatar
es3doubleO
Thread Starter
Driver
 
Joined: Aug 2004
Posts: 128
Likes: 0
From: British Columbia
Default

it feels like the engine is misfiring, and it shakes. Once it actually died on me, and recently it almost died (all the lights turned on and when I pressed the gas it was ok). I find that when i put it into neutral or turn the a/c on (while its in drive) its fine!
Reply
Old Nov 4, 2009 | 04:12 PM
  #4  
vwynn's Avatar
vwynn
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

happened to me several times.. dunno why tho.
Reply
Old Nov 4, 2009 | 04:23 PM
  #5  
bigguppy's Avatar
bigguppy
Instructor
iTrader: (15)
 
Joined: Jul 2004
Posts: 809
Likes: 2
From: California
Default

Check your TB and give it a good clean.
Reply
Old Nov 4, 2009 | 04:45 PM
  #6  
fordsvtmfl's Avatar
fordsvtmfl
Lexus Test Driver
iTrader: (13)
 
Joined: Aug 2008
Posts: 1,140
Likes: 0
From: SC
Default

Idle air control motor could be bad, start with a TB clean tho
Reply
Old Nov 5, 2009 | 10:32 AM
  #7  
maxinGS's Avatar
maxinGS
Driver
iTrader: (1)
 
Joined: Feb 2009
Posts: 114
Likes: 0
From: New Jersey
Default

this also happened to me not too long ago , and then one time after it happened, i was giving it gas and im hearing the engine but the car was struggling to move......
Reply
Old Nov 5, 2009 | 10:35 AM
  #8  
es3doubleO's Avatar
es3doubleO
Thread Starter
Driver
 
Joined: Aug 2004
Posts: 128
Likes: 0
From: British Columbia
Default

I'm not sure if this has anything to do with it but, I have a K&N drop in filter, I've heard the the oil from the filter could possibly gunk up the TB, any input?
Reply
Old Nov 5, 2009 | 12:09 PM
  #9  
NVTHSLEX's Avatar
NVTHSLEX
Lead Lap
iTrader: (3)
 
Joined: Jul 2008
Posts: 640
Likes: 0
From: Ontario
Default

I would clean the MAF sensor, and the TB.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mzeitlin
ES - 1st to 6th Gen (1990-2018)
19
Apr 10, 2018 06:39 PM
enigma9o7
ES - 1st to 6th Gen (1990-2018)
6
Apr 27, 2015 07:17 AM
countryboy
SC - 1st Gen (1992-2000)
8
Feb 25, 2011 12:09 AM
lexie
LS - 1st and 2nd Gen (1990-2000)
2
Jul 31, 2008 11:10 PM
bcclark
LS - 1st and 2nd Gen (1990-2000)
3
Dec 15, 2007 08:51 AM




All times are GMT -7. The time now is 08:40 PM.