traction control problem
12-15-07, 01:44 PM
#16
Driver School Candidate
Thread Starter
Join Date: Sep 2007
Location: il
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
sorry guys ive been working so i havent got a chance to reply. ok, what do you mean jumper tc and e1? and sorry but how do i solve this problem meant was how do i reset this thing (fix) so i can use my trac control system.
12-15-07, 02:10 PM
#17
Lexus Champion
iTrader: (1)
Join Date: Nov 2004
Location: Arizona
Posts: 1,830
Likes: 0
Received 0 Likes
on
0 Posts
Open the cap and put a piece of thin conductive material like a paper clip or wire in the spots labeled Tc and E1. Then turn the key and count the blinks. This won't reset it, but rather tell you what the issued involves.
12-15-07, 03:30 PM
#18
Driver School Candidate
Join Date: Dec 2007
Location: Poland Europe
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Trac actuator is fine
There is no brake fluid leakage
what can be wrong with the TRAC acumulator
maybe I should test ECU, is it possible, if it is, how to do it?
There is no brake fluid leakage
what can be wrong with the TRAC acumulator
maybe I should test ECU, is it possible, if it is, how to do it?
12-16-07, 10:13 AM
#19
Driver School Candidate
Join Date: Dec 2007
Location: Michigan
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have a 1994 GS 300 and yesterday was driving and all of a sudden my Check engine light came on and my Traction control light came on TRAC OFF and it wont work at all, i live in michigan and the roads are really bad, what should i do to fix the problem? Thanks
12-16-07, 11:13 AM
#20
Lead Lap
iTrader: (3)
Join Date: Dec 2007
Location: Rhode Island
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
^^^disconect the negitive terminal for 10min. then reconect and it should be good unless the check engine light comes back on and then u would have to repeat, or figuer out what code its throwing
12-17-07, 09:29 AM
#21
Driver School Candidate
Join Date: Dec 2007
Location: Poland Europe
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, I've been browsing through the forum and look what I've found
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
12-18-07, 12:34 PM
#23
Driver School Candidate
Thread Starter
Join Date: Sep 2007
Location: il
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, I've been browsing through the forum and look what I've found
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
what do you mean by ON do you mean start the car?
12-19-07, 11:34 AM
#25
ideas?
this TRAC n engine light just came on today not only that, the engine shut off on me twice in traffic, not only that, the engine is shaking crazy, not only that, the car fumes stinks, not only that, i pop the hood n see a few things leaking, not sure how long that issue was happening??? my only solution is a tune up, if im wrong im opening 4 ideas cause here n boston its cold n i need my transportation?????
there more, to mad 2 talk
there more, to mad 2 talk
12-19-07, 12:59 PM
#27
Driver School Candidate
Thread Starter
Join Date: Sep 2007
Location: il
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, I've been browsing through the forum and look what I've found
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
https://www.clublexus.com/forums/sho...ight=code%2043
may that be the solution for my problem I'll find out tomorrow cause here, in Poland, it's got a little bit dark
it is said in manual
that if you want to clear the diagnostic trouble code you have to connect Tc and E1, turn the key on, when the control lights of ABS and TFC will flash just push the breake pedal 8 or more times within 3 seconds. As I've tried this, it works.
12-19-07, 01:37 PM
#29