na-t project
#77
Lead Lap
Thread Starter
my fault i was in the middle of doing something, here you guys go.
http://vids.myspace.com/index.cfm?fu...oid=1653389647
http://vids.myspace.com/index.cfm?fu...oid=1653213885
http://vids.myspace.com/index.cfm?fu...oid=1653389647
http://vids.myspace.com/index.cfm?fu...oid=1653213885
#79
Lead Lap
Thread Starter
so, i haven't updated for a while and i have got a few more things done. Well, i just got my turbnetics turbo rebuilt and ended up getting back a garret or could be just the housing, new piping, fmic, goodgridge oil lines, t-bolts, red couplers, and i do have a new heat shield that didn't fit under my piping and throttle body if any one wants to buy it, all the parts are from threadstone.
#82
Lead Lap
Thread Starter
i did 284 hp and 294 tq at 8.7 psi, but now i'm at 10 with that fmic, so i don't have a clue? Somewhere in the 315 area for sure, maybe turn it up to 11 pounds and call it a day, not till i get a tranny cooler for a little help.
Last edited by MIC123321; 04-21-07 at 10:18 PM.
#85
Lead Lap
Thread Starter
i haven't up-dated my project for a while now, i dyoned my car a little while ago again and had to turn down the boost(10psi) i already maxed out my injectors(running back on wastegate spring 8.7 psi) and pulled 303hp and 297tq(12.6 average a/f ratio, kind of high for me) with my fmic and 3'' dp,2.5'' mid, and ys off to 2.25'' exhaust system installed. It's time to upgrade the injectors and maybe an upgraded vavle body for the tranny, does anybody know how to find one? Here's a few new pictures for you guys to see.
#90
Lead Lap
Thread Starter
lamin-x them, it's pretty cool stuff and i cut out the reflectors for the taillights. when you first put it on it looks like garbage, but after a few days with the help of sun and heat it clean its self out, even the bubbles.