Window won't roll down. whats wrong?
#16
Driver School Candidate
Join Date: Apr 2011
Location: Alberta
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Dont buy any new parts just yet. its likely a problem that can be solved easily.
as shown in the previous pics it could be in the harness where the ground is (in the DS kick panel)
mine was actually a broken wire in the door harness itself. I had to pull all the door harness plugs, take the coor panel off and pull the wiring cover back to expose a broken wire in the door hinge area.
in my case, the windows would work, then id open the door and it wouldnt (or vise versa.) then it just stopped working all together. neither window would go down. The DS switch would buzz when pressed, Pass side, nothing at all. sometimes the door locks would open and or close on their own after trying to open or close the window. Even the alarm went off once or twice. I pulled back the harnesses rubber cover and found a broken wire. Make sure you solder it properly and heat shrink it. Using butt splices and stuff is just asking for it to happen again.
as shown in the previous pics it could be in the harness where the ground is (in the DS kick panel)
mine was actually a broken wire in the door harness itself. I had to pull all the door harness plugs, take the coor panel off and pull the wiring cover back to expose a broken wire in the door hinge area.
in my case, the windows would work, then id open the door and it wouldnt (or vise versa.) then it just stopped working all together. neither window would go down. The DS switch would buzz when pressed, Pass side, nothing at all. sometimes the door locks would open and or close on their own after trying to open or close the window. Even the alarm went off once or twice. I pulled back the harnesses rubber cover and found a broken wire. Make sure you solder it properly and heat shrink it. Using butt splices and stuff is just asking for it to happen again.
#18
Driver School Candidate
Join Date: Feb 2018
Location: california
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Both windows not working failed at same time
I had this very same problem it was a bad ground wire comming off the switch. Does it make a "frying" sound or a high pitch sweeking coming from the switch. Does your dome light work, cause the "door open detection sensor" is also on the same ground, i can tell you how to fix it.
near the window button dims and that sounds like some kind of short or not a proper ground . So im believe your story very much . If possible can you tell me how you fixed this issue . Thank you
#20
Instructor
iTrader: (2)
Hi There , Yes I have same problem with the windows they failed at the same time , that's not normal to have both motors fail same moment . Any when I depress on window button to make go down the light
near the window button dims and that sounds like some kind of short or not a proper ground . So im believe your story very much . If possible can you tell me how you fixed this issue . Thank you
near the window button dims and that sounds like some kind of short or not a proper ground . So im believe your story very much . If possible can you tell me how you fixed this issue . Thank you
#21
I had this very same problem it was a bad ground wire comming off the switch. Does it make a "frying" sound or a high pitch sweeking coming from the switch. Does your dome light work, cause the "door open detection sensor" is also on the same ground, i can tell you how to fix it.
#23
Instructor
iTrader: (2)
Thread
Thread Starter
Forum
Replies
Last Post
TrymyIS
IS - 2nd Gen (2006-2013)
8
01-28-21 05:13 PM