sc400 crank but no start
#1
Pole Position
Thread Starter
sc400 crank but no start
Ok so I have a 95 sc400 obd1... I tried to wire in the electric fans to efi main relay... the car fried something I replaced ecu thinking that that was it because I have no CEL in key on engine off... I can jumper the high amp side of the efi main relay and car starts and drives but still no power from ecu to EFI relay and still no CEL... any ideas?
#4
Pole Position
Thread Starter
So I went Through I have no power getting to the ecu but all fuses have power there.... I have to have a melted splice point or wire... I have continuity through wires off ecu to efi relay black and orange wires... I also found that there is also a grounded controller side of relay... so a short in the ecu power side of ecu wireing, I have found that my radio will no longer hold memory, as well as the clock
Thread
Thread Starter
Forum
Replies
Last Post