Ignition Switch replacement
#16
same happened to me in 01 lx 470
This pb has been discussed in the past...If you do a search for Ignition Cylinder broken on lexus forum you will find how to start the car so a tow is not required and how to replace the broken cam without removing the steering column..It happened to me and the part from lexus was $200 and labor from a private shop was $480....I later found out total cost from lexus was about $720..Hope this helps...
#17
Lexus Champion
iTrader: (3)
Join Date: Dec 2003
Location: Bergen County, New Jersey
Posts: 15,059
Received 0 Likes
on
0 Posts
same happened to me...The total cost including tow was $735...The iginition cam shaft is made out of pot ash metal.. The part was $200 Labor $480 and tow $55...Later learned the car can be started with a screwdriver after removing the collar..Also, the broken part can be replaced w/o removing the entire steering wheel...The how to is posted on a past thread..Can remember the specific thread...Hope this helps.........
#20
Driver School Candidate
Join Date: Mar 2015
Location: russia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I sell a shaft, the cost of $ 50 + shipping by mail, write to the post - reform-r@mail.ru
www.keyservis.ru
www.keyservis.ru
Thread
Thread Starter
Forum
Replies
Last Post