problem with LED for DRL
10-26-13, 06:36 PM
#16
Driver School Candidate
Join Date: Jun 2013
Location: TAIWAN
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
how adjust the resisiteror ?
thanks for all your help but finally got it to works. here's the pix and the resistor that i used to make it work. no v-leds module needed.
http://www.v-leds.com/Exterior-LED/D...01806-1-3.html
http://www.v-leds.com/Exterior-LED/D...01806-1-3.html
May I ask the way to adjest the resistor. Thanks
03-12-17, 07:11 PM
#17
Driver School Candidate
Join Date: Mar 2017
Location: Illinois
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
thanks for all your help but finally got it to works. here's the pix and the resistor that i used to make it work. no v-leds module needed.
http://www.v-leds.com/Exterior-LED/D...01806-1-3.html
http://www.v-leds.com/Exterior-LED/D...01806-1-3.html
03-18-17, 02:51 AM
#18
Those bulbs should be just plug and play. You shouldn't have to do any type of rewiring.
2ndly, those bulbs are not road legal and they cost less than 25 cents to manufacture and ship from China.
2ndly, those bulbs are not road legal and they cost less than 25 cents to manufacture and ship from China.
Thread
Thread Starter
Forum
Replies
Last Post
metaleckz
IS - 2nd Gen (2006-2013)
6
05-28-14 05:20 PM
