Transmission Shifter Noise
#1
Transmission Shifter Noise
I wanted to know if anyone else has this same issue and/or have gotten it fix. Whenever I start my '08 IS250 RWD, and go to put it into any gear from P to D or P to R or R to P, you can hear the clanking as if something is slapping up against something else. It is a metal to metal noise. Car has about 58k now. Anyone experience similar noises?
#3
Driver School Candidate
I get that when parked uphill going from P to R occasionally & D to P, IMO just try to be gentle with the **** & it will be less loud ive learned. Nothing drastic just a little less loud.. as far as being worried about it I dont think its doing any harm most cars do that when shifting if you listen close enough.
#5
Pole Position
Join Date: Jul 2007
Location: California
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I wanted to know if anyone else has this same issue and/or have gotten it fix. Whenever I start my '08 IS250 RWD, and go to put it into any gear from P to D or P to R or R to P, you can hear the clanking as if something is slapping up against something else. It is a metal to metal noise. Car has about 58k now. Anyone experience similar noises?
Last edited by triple_c; 05-09-13 at 06:51 PM.
#6
I agree with putting the parking brake on if on an incline. My driveway has a steep incline. One time I forgot to depress the parking brake and I did have a clunk when I put the car into reverse.
The stress on the transmission is much less with the parking brake on if on a hill
The stress on the transmission is much less with the parking brake on if on a hill
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
napbnico
IS - 3rd Gen (2014-present)
1
04-02-19 03:28 PM
flashes23
LX - 1st and 2nd Gen (1996-2007)
3
05-20-17 01:40 AM