i change brake pads now all brake lights are on
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2010
Location: FL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
i change brake pads now all brake lights are on
hello friends ,i just change the brake pads it was eaasy ,but when i started the engine the brake lights are on,the stability control ,the pcs & the abs are on too & the information shows check pcs ,check vsc ,check ecb , i umplog the battery for a minute but didnt help if some one can help me please i will apreciate any help ,thanks
#5
Driver School Candidate
Join Date: May 2011
Location: ny
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
ah thats easy.. i come across this everytime i do my brakes.
if it says anything related to a hydraulic problem then
just reset the codes in the abs/trc/vsc..... and voila everything works back...
if no hydraulic codes... then u need to reporgram the whole system,, 4 steps only..
1/ go to abs/trc/vsc , ecb utility and reprogram (1.ecb, 2.abs, 3.vsc and 4.zero point calibration).....
all that should be done using toyota techstream or toyota intelligent tester...
if it says anything related to a hydraulic problem then
just reset the codes in the abs/trc/vsc..... and voila everything works back...
if no hydraulic codes... then u need to reporgram the whole system,, 4 steps only..
1/ go to abs/trc/vsc , ecb utility and reprogram (1.ecb, 2.abs, 3.vsc and 4.zero point calibration).....
all that should be done using toyota techstream or toyota intelligent tester...
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: Jun 2010
Location: FL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies friends, the thing was that I did press the brakes when I was changing the brakes. It was my error by doing so. I took it to a friends shop to reset it. It looked like a Christmas tree with all those lights on luckily its Christmas. LOL... My friend at the shop did state that I should of taken off the battery when I was changing the brake pads. I would like to thank you all for all your help once again you guys are GREAT!!!
Thread
Thread Starter
Forum
Replies
Last Post
PeteV
GS - 3rd Gen (2006-2011)
13
07-07-10 10:11 AM