Question....GS300 Coolant Temp sensor for gauge cluster
12-21-10, 02:02 PM
#1
Question....GS300 Coolant Temp sensor for gauge cluster
After talking to Sewell and my local dealership. I figured out the part number (83420-30020) for the coolant temp sensor/sending unit that sends its signal to the gauge cluster.
Now my question is.....what does the plug look like? (i no longer have my stock engine/harness so i cant look at it).
Does anyone have a picture of the plug that goes into the sensor/sending unit?
I will upload some pictures of the sensor/sending unit that i am talking about shortly.
Now my question is.....what does the plug look like? (i no longer have my stock engine/harness so i cant look at it).
Does anyone have a picture of the plug that goes into the sensor/sending unit?
I will upload some pictures of the sensor/sending unit that i am talking about shortly.
Last edited by AMSMIKE; 12-21-10 at 02:11 PM.
12-15-13, 03:17 PM
#7
If you are looking for the sensor that the gauge takes its readings from, it is called the "sender gauge" or the "coolant sender gauge". It has just 1 pin on the connector plug. Not 2 pins on the plug like the typical coolant temperature sensor. You can type "gs300 coolant sender gauge" on ebay and they are around 13$ each.
Thread
Thread Starter
Forum
Replies
Last Post
BluesImage
LS - 1st and 2nd Gen (1990-2000)
8
05-03-14 08:51 PM
GreenUCF20
LS - 1st and 2nd Gen (1990-2000)
4
08-19-12 04:46 PM
8342030020, cluster, coolant, ect, gauge, gs300, leus, lexus, location, questiongs300, sensor, switch, temp, temperature, water
