tknx

If you decide to go aftermarket on your wipers, not that on my 2013, the recommended 28A/18B combo bump into each other when at the bottom setting causing a thump.

I just put a 26A on the driver's side to see if that works okay. If not, I'll go back to OEM / Denso wipers.

joedaddy1

iTrader: (1)

26 is the factory size

Patrick4GS

iTrader: (2)

My local parts place told me it was 28" and 18" as well. They did the same thing and rubbed together when in use, the driver side was also close to the roof above the windshield. Switched to a 26 and all is well.

tknx

Yep 26 works fine.

Bosch has it wrong in their system (and so does Amazon).

bclexus

The OE wipers do a pretty nice job...

Dallasguy1

The stock wipers do pretty Gud , u can just change the inserts if they are wore down.

jj14

I need to change mine - are the inserts only available at the dealership? Or can they be purchased elsewhere?

Dallasguy1

Dealer if not eBay is your best bet.

Htony

I just measure the length of blade when I replace with after market blades. Can't trust look up chart.