ClubLexus - Lexus Forum Discussion
0 2015/11/18 07:52:38
One of the clamps with I.D. 10
One of the clamps with I.D. 10
0 2015/11/15 19:36:13
Degraded plastic clamp on valve cover
Degraded plastic clamp on valve cover
0 2015/11/15 19:31:21
Another clamp is for wire loom that runs parallel to valve cover and presses onto a bracket. The tan clamp is incorrect part reveivef from dealer.
Another clamp is for wire loom that runs parallel to valve cover and presses onto a bracket. The tan clamp is incorrect part reveivef from dealer.
0 2015/11/15 19:11:50
Mine showing missing clamp attop throttle body.
Mine showing missing clamp attop throttle body.
0 2015/11/15 18:47:42
An online image illustrating top view of clamp installed in bracket
An online image illustrating top view of clamp installed in bracket
0 2015/11/15 18:42:08
An image located online showing the wiring harness atop throttle body with two plastic clamps
An image located online showing the wiring harness atop throttle body with two plastic clamps
0 2015/11/15 18:41:22
0 2015/11/14 13:53:04
0 2015/11/14 13:52:44
0 2015/11/14 11:49:52
0 2015/11/12 11:04:43
0 2015/11/12 11:04:35
0 2015/11/12 11:04:30
0 2015/11/12 11:03:58
0 2015/11/12 11:03:35
Aluminum housing boss tapped on existing boss by machine shop to accommodate Marine grade brass hose fitting. The LS400 minor coolant hose fitting(pressed in place?) was immune to extraction without destroying the LS400 housing and uncertainty about exact hole diameter to drill (tapeted?) in LS430 housing favored a brass fitting.
Aluminum housing boss tapped on existing boss by machine shop to accommodate Marine grade brass hose fitting. The LS400 minor coolant hose fitting(pressed in place?) was immune to extraction without destroying the LS400 housing and uncertainty about exact hole diameter to drill (tapeted?) in LS430 housing favored a brass fitting.
0 2015/11/09 05:18:14
Stock LS400 hoses, fasteners, inlet neck o-ring and thermostat gasket are used.
Stock LS400 hoses, fasteners, inlet neck o-ring and thermostat gasket are used.
0 2015/11/09 05:17:54
LS430 Water Inlet Housing installed in LS400
LS430 Water Inlet Housing installed in LS400
0 2015/11/09 05:17:19
The machine shop was challenged to remove the pressed in(?) nipple,..without destroying it, and then drilling a precision hole (tapered?), in the LS430 housing, selected this approach. Original o-ring,, thermostat gasket, fasteners and hoses.
The machine shop was challenged to remove the pressed in(?) nipple,..without destroying it, and then drilling a precision hole (tapered?), in the LS430 housing, selected this approach. Original o-ring,, thermostat gasket, fasteners and hoses.
0 2015/11/08 23:48:47
Used a professional machine shop to drill and tap hole for marine grade brass fitting.
Used a professional machine shop to drill and tap hole for marine grade brass fitting.
0 2015/11/08 23:46:39
LS430 water inlet housing installed in LS400
LS430 water inlet housing installed in LS400
0 2015/11/08 23:39:09
0 2015/11/08 23:26:45
0 2015/11/08 23:25:25
0 2015/11/08 23:20:27
1999 LS400 wood steering wheel
1999 LS400 wood steering wheel
0 2015/11/06 11:08:18
LS400 Water Inlet Housing. .
LS400 Water Inlet Housing. .
0 2015/11/06 01:13:32
LS430 Water Inlet Housing
LS430 Water Inlet Housing
0 2015/11/06 01:12:15
0 2015/11/06 01:11:16
0 2015/11/06 00:40:42
0 2015/11/06 00:40:15
0 2015/11/06 00:39:41