ClubLexus - Lexus Forum Discussion
0 2021/09/28 14:33:24
Entire dash wiring harness for Nakimichi option depicted
Entire dash wiring harness for Nakimichi option depicted
0 2021/09/26 21:09:20
Center console plate depicting Nakimichi optioned wiring harness plugged into seat heater switches (top).
Center console plate depicting Nakimichi optioned wiring harness plugged into seat heater switches (top).
0 2021/09/26 21:05:52
0 2021/09/26 10:10:33
0 2021/09/22 20:42:50
0 2021/09/17 14:32:22
The area to be boxed.
The area to be boxed.
0 2021/09/17 14:29:19
Rear subrame to chassis mounting bracket centers the rear subframe bushings
Rear subrame to chassis mounting bracket centers the rear subframe bushings
0 2021/09/17 14:26:53
Replacement subframe
Replacement subframe
0 2021/09/17 14:25:38
0 2021/09/16 13:11:37
0 2021/09/14 16:54:48
Here's the rub... The cabin filter access panels on the LS430 (left) and LS400 differ. The locking tab orientation is identical, however the opposing positioning tabs are different.
Here's the rub... The cabin filter access panels on the LS430 (left) and LS400 differ. The locking tab orientation is identical, however the opposing positioning tabs are different.
0 2021/09/12 21:08:49
0 2021/09/12 21:08:04
The housing is modular, so perhaps an LS430 cabin filter plastic housing section from another Toyota model will allow plug and play. GS300 or GS400?
The housing is modular, so perhaps an LS430 cabin filter plastic housing section from another Toyota model will allow plug and play. GS300 or GS400?
0 2021/09/12 21:03:20
The opposite side of housing does not fully close due to cabin filter tray clearance issues.
The opposite side of housing does not fully close due to cabin filter tray clearance issues.
0 2021/09/12 21:00:25
Upper and lower halves of housing reunited at filter access.
Upper and lower halves of housing reunited at filter access.
0 2021/09/12 20:58:13
0 2021/09/12 20:57:27
Image depicting upper and lower section of cabin filter housing. The ramps of LS400 housing will require milling to accommodate the taller LS430 cabin filter..
Image depicting upper and lower section of cabin filter housing. The ramps of LS400 housing will require milling to accommodate the taller LS430 cabin filter..
0 2021/09/12 20:54:17
The cleft plastic plate just inside rectangular access will need to be removed. Easy enough.
The cleft plastic plate just inside rectangular access will need to be removed. Easy enough.
0 2021/09/12 20:50:12
LS430 filter tray will not insert.
LS430 filter tray will not insert.
0 2021/09/12 20:48:34
LS400 cabin filter tray
LS400 cabin filter tray
0 2021/09/12 20:47:01
Same length X width.
Same length X width.
0 2021/09/12 20:45:23
LS430 cabin filter tray is taller than LS400 (bottom)
LS430 cabin filter tray is taller than LS400 (bottom)
0 2021/09/12 20:43:26
0 2021/09/12 20:42:11
Cover removed. There are 4 capacitors. Values are on opposite side, but it appears complex formed capacitor leads are flattened where joining the buss bar structure suggesting they are fused/welded instead of soldered (??) Anyone know? Yamae..
Cover removed. There are 4 capacitors. Values are on opposite side, but it appears complex formed capacitor leads are flattened where joining the buss bar structure suggesting they are fused/welded instead of soldered (??) Anyone know? Yamae..
0 2021/09/12 20:16:52
Image of controller from 1999 LS400.
Image of controller from 1999 LS400.
0 2021/09/12 20:15:07
Side-by-side
Side-by-side
0 2021/09/09 20:32:31
LS400 cabin filter atop thicker LS430 filter
LS400 cabin filter atop thicker LS430 filter
0 2021/09/09 20:30:25
Although the replacement connector shell is same part number as original, the compression wings on the new connector shell are improved
Although the replacement connector shell is same part number as original, the compression wings on the new connector shell are improved
0 2021/09/09 19:56:46
Droopy compression tabs and tired lances.
Droopy compression tabs and tired lances.
0 2021/09/09 19:55:16
0 2021/09/09 19:47:53
Valve stem seal pricing...
Valve stem seal pricing...
0 2021/09/06 10:05:45
Oem Toyota alve stem seal pricing from Japan. It appears there was a change end of 1994 for separate part numbers on intake and exhaust valve stem seals.. Unsure if due to next engine generation (Model year is year manufactured, not the B.S. U.S. standard of applying model year to vehicle produced prior year)
Oem Toyota alve stem seal pricing from Japan. It appears there was a change end of 1994 for separate part numbers on intake and exhaust valve stem seals.. Unsure if due to next engine generation (Model year is year manufactured, not the B.S. U.S. standard of applying model year to vehicle produced prior year)
0 2021/09/06 09:58:20
With pricing...
With pricing...
0 2021/09/06 09:56:36
Japanese sourced engine gasket kits. The upper engine kit appears available. the kit including lower engine seals appears discontinued
Japanese sourced engine gasket kits. The upper engine kit appears available. the kit including lower engine seals appears discontinued
0 2021/09/06 09:54:08
Lexus part number for valve stem seals and North American pricing.
Lexus part number for valve stem seals and North American pricing.
0 2021/09/06 09:52:02
The LS400 dipstick handle is superior. What on earth inspired this yellow pull ring?
The LS400 dipstick handle is superior. What on earth inspired this yellow pull ring?
0 2021/09/05 22:17:27
LS400 (1UZ-FE) dipstick (top) no o-ring LS430 (3UZ-FE) dipstick with o-ring
LS400 (1UZ-FE) dipstick (top) no o-ring LS430 (3UZ-FE) dipstick with o-ring
0 2021/09/05 22:14:31
Valve stem seals are color-coded for intake or exhaust valves.
Valve stem seals are color-coded for intake or exhaust valves.
0 2021/09/05 21:01:33
The 3UZ-FE dipstick on LS430 is considerably longer than 1UZFE on LS400. It appears the 3UZ-FE dipstick will fit the 1UZ-FE dipstick tube and can be easily shortened and drilled for high/low mark. Unlike the LS400 with crosshatch pattern and markings, the LS430 dipstick has only two holes for oil level
The 3UZ-FE dipstick on LS430 is considerably longer than 1UZFE on LS400. It appears the 3UZ-FE dipstick will fit the 1UZ-FE dipstick tube and can be easily shortened and drilled for high/low mark. Unlike the LS400 with crosshatch pattern and markings, the LS430 dipstick has only two holes for oil level
0 2021/09/05 16:17:57