How to wire it up.

A) 1 power wire off the battery to trunk to a Distribution block

B) 2 power wires off the battery to the trunk

3) use accuair install kit


I saw the accuair wite kit http://grunionfabrication.com/accuai...it-p-2293.html just looks to dinky for dual AZ compressors.

 

A) 1 power wire off the battery to trunk to a Distribution block .

Use 4ga power from battery to the trunk....

 

The accuair kit will work for dual compressors

 

Swtjlsy on the install AZ instructions it mentioned on a dual setp if the power wire has to be more the like 6 feet you need 4 gauge wire. Thats what was making me the the accuair kit wouldnt cut it.

 

yeah it's a non issue AZ due draw more current than viair but you should be fine. you can always just purchase a amp kit and install plus will save you some money. you will just need to purchase relay or solenoid

 

Ya i have a bunch of 4 gauge left over from a roll i bought. But each AZ compressor comes with a relay already attatched. Just need to buy the fuseholder for the battery side of the pwr wire. Thanks guys

 

Yeah you got it^ ....i used to run dual OBD2s but then downgraded to a 3 gal tank and dual 444 thinking that they should do the job for 3 gal tank. Sure they do but they are noisy as crap, i should go back to my OBD2s

 

noise isnt really going to bother me i listen to loud music 95% of the time im driving lol

 

az is much faster fill up times, one obd2 fills up like 2 444c LMAO oh well i dont have any room for az if i did i would run them still