View Poll Results: If you have had the "steering wheel vibration", what option best describes your ride?
GS300, STOCK suspension AND STOCK wheels
3
27.27%
GS300, lowered and/or wheel spacers and/or 18"+ wheels
4
36.36%
GS400/430, STOCK suspension AND STOCK wheels
0
0%
GS400/430, lowered and/or wheel spacers and/or 18"+ wheels
4
36.36%
Other (see below)
0
0%
Voters: 11. You may not vote on this poll
Steering Vibration Poll
05-12-11, 01:29 PM
#1
Steering Vibration Poll
Please direct me if this poll, or similar, has already been done. I am trying to establish some more info regarding the "2GS Steering Vibration" issues that are potentially so common.
PLEASE ONLY VOTE TOP 4 OPTIONS IF YOUR VEHICLE VIBRATION WAS REMEDIED (or attempted) BY SUSPENSION RENEWING OR WHEEL/TIRE BALANCING. Consider steering rack part of suspension.
Please vote "OTHER" if it was something like: rotors warped, rust on wheel hubs, not using hubcentric rings, motor mounts, or anything else you care to elaborate on.
Essentially, I am trying to see if GS400/430 is more prone than GS300. Also trying to see if it is a result of modifications or not (wheel size, spacers, lowering springs). I realize there are some holes in this Poll, but I did not want to offer 16 options!!
Also, please be polite and DO NOT HIJACK THIS THREAD to focus/complain/discuss any particular issue. Chances are, it has been discussed elsewhere. I am guilty of this, so I realize I am asking for you to cooperate where I have failed in the past. You can direct others to other forums/threads, but I do not want this to become 10 pages of "change your ball joints and bushings!' Or pre-tensioner. Or road-force wheel balancing.
Thanks for your time...
PLEASE ONLY VOTE TOP 4 OPTIONS IF YOUR VEHICLE VIBRATION WAS REMEDIED (or attempted) BY SUSPENSION RENEWING OR WHEEL/TIRE BALANCING. Consider steering rack part of suspension.
Please vote "OTHER" if it was something like: rotors warped, rust on wheel hubs, not using hubcentric rings, motor mounts, or anything else you care to elaborate on.
Essentially, I am trying to see if GS400/430 is more prone than GS300. Also trying to see if it is a result of modifications or not (wheel size, spacers, lowering springs). I realize there are some holes in this Poll, but I did not want to offer 16 options!!
Also, please be polite and DO NOT HIJACK THIS THREAD to focus/complain/discuss any particular issue. Chances are, it has been discussed elsewhere. I am guilty of this, so I realize I am asking for you to cooperate where I have failed in the past. You can direct others to other forums/threads, but I do not want this to become 10 pages of "change your ball joints and bushings!' Or pre-tensioner. Or road-force wheel balancing.
Thanks for your time...
Thread
Thread Starter
Forum
Replies
Last Post
1JAYZ
GS - 2nd Gen (1998-2005)
5
04-12-18 10:04 AM
Rowdiggty
LS - 3rd Gen (2001-2006)
14
06-10-13 11:56 AM
