tein CS
#1
Lead Lap
Thread Starter
Join Date: Jan 2002
Location: ca
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
tein CS
Does anyone know how low Tein CS can lower the car from the stock height?
I was told it provides a 2.5" drop, but thier website says 1.7" front and 2.2" rear ( Tein Website: Ride Height Adjust Range ). Does anyone have actual numbers?
Wouldn't a 2.5" drop put the tire under the fender?
I was told it provides a 2.5" drop, but thier website says 1.7" front and 2.2" rear ( Tein Website: Ride Height Adjust Range ). Does anyone have actual numbers?
Wouldn't a 2.5" drop put the tire under the fender?
#3
i wish i could give u actual number but i remember when they 1st put my coils on they had the front tucked..and they said it could have gone a little lower but i asked them 2 raise it where i had no finger gap but than do 2 tire ware i ad 2 raise it again....
Trending Topics
#8
Lead Lap
Thread Starter
Join Date: Jan 2002
Location: ca
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by LXOGOOD
Here's a front shot.... Lowered about 2.25" with a few threads left to lower it some more..
Here's a front shot.... Lowered about 2.25" with a few threads left to lower it some more..
does it look the same to you?
#9
Here is mine on 20's, wheel size does make a difference I also have pics in my gallery on 18's with the same drop.
https://www.clublexus.com/gallery/sh...cat=500&page=3
https://www.clublexus.com/gallery/sh...cat=500&page=3
#10
exclusive matchup
iTrader: (4)
Originally posted by SandRock
Here is mine on 20's, wheel size does make a difference I also have pics in my gallery on 18's with the same drop.
https://www.clublexus.com/gallery/sh...cat=500&page=3
Here is mine on 20's, wheel size does make a difference I also have pics in my gallery on 18's with the same drop.
https://www.clublexus.com/gallery/sh...cat=500&page=3
#11
Lead Lap
Thread Starter
Join Date: Jan 2002
Location: ca
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rominl
well 20s are like cheating coz' you have a 1/2" "head start"
well 20s are like cheating coz' you have a 1/2" "head start"
but does it look the same as the other with CS dropped 2.5?
#12
Keep in mind that the springs settle and you might have to re-adjust them. LXOGOOD has had his for a while thats why his drop is so low and might differ fron the Tein numbers. With the fat set up you can tuck the wheel. I have about 6 threads left thats about as low as I will go because unlike in Cali we have bumps in the road here. I am going to re-level my height because believe it or not all of the rings are not set the same. Then Im going to get it aligned...go ahead and get a set you will love them.
#14
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
hey jim,
With the seasons and your switching of factory to 19s, I think these would be good for you, also the soft dampening will help out on the rough Western Mass streets! LOL
With the seasons and your switching of factory to 19s, I think these would be good for you, also the soft dampening will help out on the rough Western Mass streets! LOL