When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2006 IS350 .....the whole top half of the navigation screen and buttons have no power... just the clock, hazard and security blinker work.... all the fuzes are ok...
Last edited by doroftei; Jan 22, 2017 at 09:04 PM.
You have bad main board. It becomes more popular now. You need to replace the display driver board
Display driver board has green connector need to be replaced This is the one cause the problem
Last edited by whitebeast; Jan 22, 2017 at 11:47 PM.
ok...i have looked at all the threads that deal with this and mine is completely dead, i have not seen someone have anything similar to this........were can i get one? or is this a diy? I'm guessing its in the middle of the stack?
Last edited by doroftei; Jan 24, 2017 at 12:12 AM.
Most of after market unit only plug and play for non navigation equipped car. If you have factory NAV then more wiring work will be involved but doable