Will these tire and wheel combo fit the rear of the F without rolling the fender? I have stock suspension.

Wheels:19x10 offset 38
Tires: 265/35 19"

Thanks in Advance

 

yeah...should be good...flush.

 

thank you.

 

You might have to roll/shave but it will fit...

 

shouldnt need a roll/shave if he's on stock suspension i don't think. but then again, i don't know what does or doesn't fit on an is-f :P

 

he's on stock suspension so it should be fine

 

but if he has big friends in the back, i dunno...

 

Just some food for thought.

I had some nice tire rubbing/cutting going on, with stock suspension..

With this set up:

19x9.5 w/ a 35mm offset on a 265-30 Yokohama Advan Sport tire

Solved via DIY .. (Not recommend for the novice)

_

Joe Z

 

haha...me too!!!

 

After grinding the edges of the fenders did you guys just leave the paint alone?
any chipping of the paint? maybe a can of clearcoat will help?

Which is better grinding or rolling?

35 vs 38 offset...whats the difference?

 

^^ 3mm j/k

A 35mm will stick out more than a 38mm on a 19x9.5 inch rim..
Same would apply to a 19x10 rim..

However, the 19x10 rim is a 1/4" wider on each side, which will push outward more.

After the grinding/cutting/shaving process.. I recommend to use the color matched touch up paint bottle and give it a nice layer of oem paint.

Joe Z

 

ok I just got my lc's....so far no rubbing on a 35 series tire mounted to a 19x10.38 offset rim.

 

^^ So far... but it will for sure on major dips or when you have people in the back seats

Joe Z