2002 SC430 GPS/NAV overrride
#17
Lead Lap
In my '02 with version 9.1, there is no "System Option". only Resume Guidance, Map Appearance, Volume, Setup, Marked Routes, Route Overview, Edit Routes, Route Preview and DVD.
Last edited by Harold57; 06-20-10 at 10:07 AM.
#19
Lead Lap
I found out that you use "DVD" rather than "System Option" and then it works. So the "Override" function still exists in V.9.1.
#21
Driver School Candidate
Join Date: Dec 2011
Location: TX
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
In my 2005 SC430 the fuse is on the passenger side kick plate, fuse #29.
I was able to make a hybrid DVD with absolutely no problems. After I pulled the fuse and put it back in, I was able to get into the menu and Override with no problems whatsoever.
I was able to make a hybrid DVD with absolutely no problems. After I pulled the fuse and put it back in, I was able to get into the menu and Override with no problems whatsoever.
#23
Lexus Test Driver
I re read my instructions and noticed I left out one step
Press menu
then press system options
when the option screen appears
touch the top left corner of the screen,
bottom left corner
top left corner
bottom left corner
Finally the bottom right corner
that opens the new screen but that's on the U.S. version.
Press menu
then press system options
when the option screen appears
touch the top left corner of the screen,
bottom left corner
top left corner
bottom left corner
Finally the bottom right corner
that opens the new screen but that's on the U.S. version.
#24
Pole Position
iTrader: (1)
I use this method all the time but I am running gen10.1 nav software. I heard anything greater than 10.1 they've disabled this "hack." Also the steps above are slightly incorrect, in my opinion. I always start from the Language Menu Screen. When instructed which language i want (English/French and then the conformation of danger), I do the following before pressing the "I Agree" button on the right:
Touch upper left corner;
Touch lower left corner;
Touch upper left corner;
Touch lower left corner;
Touch lower right corner:
Find GPS OVERRIDE button and hold down until illuminated blue;
Press back in top right.
Then press the MENU Hard button above the Air Conditioning LCD;
Choose Language, select English and then"I agree".
This will give you override until you turn off the car. Upon restarting the ignition, you will have to redo the steps above. I use mine all the time on long trips or on the fly directions. Like i said earlier though (from my understanding), this will only work on versions previous to and including 10.1.
Additionally, you can always do this method on the fly while driving by hitting the HARD Menu button and going to Language.
Touch upper left corner;
Touch lower left corner;
Touch upper left corner;
Touch lower left corner;
Touch lower right corner:
Find GPS OVERRIDE button and hold down until illuminated blue;
Press back in top right.
Then press the MENU Hard button above the Air Conditioning LCD;
Choose Language, select English and then"I agree".
This will give you override until you turn off the car. Upon restarting the ignition, you will have to redo the steps above. I use mine all the time on long trips or on the fly directions. Like i said earlier though (from my understanding), this will only work on versions previous to and including 10.1.
Additionally, you can always do this method on the fly while driving by hitting the HARD Menu button and going to Language.
#25
Lexus Test Driver
I use this method all the time but I am running gen10.1 nav software. I heard anything greater than 10.1 they've disabled this "hack." Also the steps above are slightly incorrect, in my opinion. I always start from the Language Menu Screen. When instructed which language i want (English/French and then the conformation of danger), I do the following before pressing the "I Agree" button on the right:
Touch upper left corner;
Touch lower left corner;
Touch upper left corner;
Touch lower left corner;
Touch lower right corner:
Find GPS OVERRIDE button and hold down until illuminated blue;
Press back in top right.
Then press the MENU Hard button above the Air Conditioning LCD;
Choose Language, select English and then"I agree".
This will give you override until you turn off the car. Upon restarting the ignition, you will have to redo the steps above. I use mine all the time on long trips or on the fly directions. Like i said earlier though (from my understanding), this will only work on versions previous to and including 10.1.
Additionally, you can always do this method on the fly while driving by hitting the HARD Menu button and going to Language.
Touch upper left corner;
Touch lower left corner;
Touch upper left corner;
Touch lower left corner;
Touch lower right corner:
Find GPS OVERRIDE button and hold down until illuminated blue;
Press back in top right.
Then press the MENU Hard button above the Air Conditioning LCD;
Choose Language, select English and then"I agree".
This will give you override until you turn off the car. Upon restarting the ignition, you will have to redo the steps above. I use mine all the time on long trips or on the fly directions. Like i said earlier though (from my understanding), this will only work on versions previous to and including 10.1.
Additionally, you can always do this method on the fly while driving by hitting the HARD Menu button and going to Language.
#26
Pole Position
iTrader: (1)
Yes, you can do it at that point or if you've already started driving you can press the hard MENU button above the Climate LCD and go to the Language screen and do it there, also. Two options. Doubt that it will work with 11.1, but worth a try. I decided to stay with 10.1 since I was told that this hack won't work on versions after 10.1.
#27
Instructor
Don't know about '02 but mine's an '06 and my routine is:
Step 1 Press The Menu button
Step 2 Press the Volume button
Step 3 Press The Upper Left of the screen
Step 4 Press The Lower Left of the screen
Step 5 Press Upper Left of the screen again
Step 6 Press Lower Left of the screen again
Step 7 Press and hold the Override Button until system beeps
Step 8 Press Back Button in upper right corner
Hope this helps.
Step 1 Press The Menu button
Step 2 Press the Volume button
Step 3 Press The Upper Left of the screen
Step 4 Press The Lower Left of the screen
Step 5 Press Upper Left of the screen again
Step 6 Press Lower Left of the screen again
Step 7 Press and hold the Override Button until system beeps
Step 8 Press Back Button in upper right corner
Hope this helps.
None of the other methods worked. Thanks. I really like the simplicity of it. The other methods had me hitting the right lower corner of the screen and thast is where the "accept" button was, so it didnt work.
Thread
Thread Starter
Forum
Replies
Last Post
shairise12
SC430 - 2nd Gen (2001-2010)
1
01-23-10 08:50 AM