When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 1992 with Aristo ECU and a single turbo NA-T. Cylinder 3 will not fire. i have checked all I know to check so if anyone knows what else can be wrong, would you please post it.
Here's a list of what I have done.
Swapped injectors 1 and 3, misfire stayed on 3.
Swapped plugs 3 and 4, stayed.
Put the 3-4 coil on 3 with the lead running to 4, stayed.
Put a noid light on 3, getting good flash.
put injector 3 connector on injector 4, cylinder 4 runs with this.
continuity check injector connector to ecu and other injector connectors. good.
pulled vacuum hose off fuel pressure regulator, nothing.
jumped fuel pump with 12 volts in diagnostic connector, nothing.
verified timing.
valve clearance good.
Compression 180 psi. leakdown test was great 100%.
this to me still does not explain why when i attach injector 3 clip to cylinder 4 injector, cylinder 4 runs. the exhaust has unburnt fuel in the turbo manifold.