fuel gauge needle not moving
#1
Lexus Champion
Thread Starter
fuel gauge needle not moving
so today i wanted to just put a little gas in my 92 sc400. premium was 4 bucks so i just put in 4 gallons of just unleaded. and then the needle didn't move? i drove the car for like 4 more hours (i deliver pizzas) and the needle actually moved down a tiny bit. never had this problem before and now the needle sits nearly at empty with no low fuel light or anything. car drives fine and everything is cool. gonna try to put in a bunch of gas tmr since i got paid. anyone had a problem similar to this? does lower octane gas not raise the floater like higher octane does? this is really weird lol.
#4
Lexus Champion
Thread Starter
cud it just be the gauge like the guy in the post said? i recently removed the cluster to try and take a look at the needle lights since they dont work. maybe i just didn't plug it in all the way or something. i'll mess with that first and if that doesn't work then i'll go to the tank. but putting in regular unleaded shouldn't be a huge problem once in a while right?
#5
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
cud it just be the gauge like the guy in the post said? i recently removed the cluster to try and take a look at the needle lights since they dont work. maybe i just didn't plug it in all the way or something. i'll mess with that first and if that doesn't work then i'll go to the tank. but putting in regular unleaded shouldn't be a huge problem once in a while right?
#7
Could also be the fuel gauge motor in the cluster. We see that quite a bit.
__________________
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
vangboi209
LS - 1st and 2nd Gen (1990-2000)
1
04-06-12 04:19 PM
curepunx
LS - 1st and 2nd Gen (1990-2000)
5
07-20-09 05:02 PM