vinyl car wrapping
has anyone had their sc vinyl wrapped? whts ur opinions on wrapping? is it noticible or pretty good as paint? i kind of want to do a gloss black over my car instead of repainting it, its much cheaper
i can paint cars, ive done alot of cars now, it runs me about 2g for materials paint and all, but i go all out on my jobs thats y im looking at wrapping my car but i wana see/hear peoples thoughts before i go ahead and order the vinyl to start wrapping, ive wrapped alot of smaller things like dashes and stuff but i wanna know bout the outside of the car and how itd look
i can paint cars, ive done alot of cars now, it runs me about 2g for materials paint and all, but i go all out on my jobs thats y im looking at wrapping my car but i wana see/hear peoples thoughts before i go ahead and order the vinyl to start wrapping, ive wrapped alot of smaller things like dashes and stuff but i wanna know bout the outside of the car and how itd look
Ive painted a few cars and the only problem is there is a big learning curve, it takes time to get it right , trial and error, but it is nowhere near 2 grand to do it yourself.
Heres the list and its nowhere near 2 grand as said above,
color matched base coat paint---$150.00 give or take a bit
clear coat ---$100.00--probably less
thinner-reducer------$50.00--probably less
sandpaper--tape----tack cloth etc....----20$--30$
Rental of sprayer----less then 100$ or less--sprayers can be bought for cheap these days also.
Thats pretty much it unless you want to sand and buff the car , wich by the way is something u dont want to do unless u have experiance.
Its no more then $500 to do it properly, and can be done even cheaper if you are resourceful
primer, base (atleast 3-4 coats) and use expensive stuff, did a cavalier in bayside blue (skyline) the paint alone ran me 750, tape, paper, sand paper lots of wet/dry paper, clear coat (3 coats), rubbing compound for buffing either 3m or megiuers it all racks up, like i said i go all out on my jobs i can do a cheaper job but i wont be too satisfied

https://www.clublexus.com/forums/sc-...-wrapping.html
There is another link in there on the subject with ASTERiSK wanting to vinyl wrap his.
One a side note: Great information on paint 1Willy1. I'm gathering supplies to do my car and I've been asking a few members/friends a lot about it. Would you mind PMing me your process? Basially renewing 8J5
Trending Topics
I'm actually thinking of wrapping mine in that same satin-esque matte look to it. I'm just scared of it being installed poorly. There is a technician I know at Toyota who has his Matrix wrapped it comic-style weird stuff, and it has a few wrinkles in it, and it's just grainy and im afraid of that. haha
Sorry but that is NOT my SC. sorry for any confusion.
"You will need two rolls at 60"h x 10 yards long. Or you can purchase a 60"h x 25yard roll. Choose a vinyl from the "big three"....Oracal, Avery, or 3M. Prices vary but you'll be looking at $500-700 for material alone. Pick up a heat gun, felt squeegee, and an exacto knife with fresh blades on hand. Best of luck and post pics when you're done." - Tabaka
If you have wrapping experience it would be dirt cheap. But like a previous member said it ran 1400~ Which probably includes labor.
"You will need two rolls at 60"h x 10 yards long. Or you can purchase a 60"h x 25yard roll. Choose a vinyl from the "big three"....Oracal, Avery, or 3M. Prices vary but you'll be looking at $500-700 for material alone. Pick up a heat gun, felt squeegee, and an exacto knife with fresh blades on hand. Best of luck and post pics when you're done." - Tabaka
If you have wrapping experience it would be dirt cheap. But like a previous member said it ran 1400~ Which probably includes labor.
i think im gonna give it a shot for wrapping my own car, couldnt be too hard, i think ill do gloss black or a satin matte look black, have to decide, but ill be doing it during the winter cuz my car will sit all winter
I posted in that thread, and I'll post in this one
Wrapping an SC isn't too difficult. Just have some patients and an entire weekend available. Keep in mind that you will have a seam somewhere on the "C" pillar. Best of luck, wholesale cost should be near $600 with shipping. The quote for $1400 with labor is actually a very good price considering the amount of hours it typically takes.
Wrapping an SC isn't too difficult. Just have some patients and an entire weekend available. Keep in mind that you will have a seam somewhere on the "C" pillar. Best of luck, wholesale cost should be near $600 with shipping. The quote for $1400 with labor is actually a very good price considering the amount of hours it typically takes.
F black, white, and red.Those colors are so plain and are the "COOL" common colors. Vinyl wrap should be for awesome creative options! 
Ooooh!
http://www.youtube.com/watch?v=tNyzamOVr40

Ooooh!

http://www.youtube.com/watch?v=tNyzamOVr40




