Stock 2jzgte and a tune
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: Texas
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Stock 2jzgte and a tune
What kind of hp and whp numbers should i expect after i finish the swap. 92 sc300 swapin the aristo gte motor with usdm turbos and fmic and an SAFCII. the harness is just getting finished up and i should have it back tues or wednesday? former G35 owner so not sure what to expect with the toyota. eventually soon i will do bigger injectors, cams, and fuel pump. my goal is 450-500whp. trying to setup for drift.
#6
Lexus Test Driver
iTrader: (8)
Join Date: Sep 2007
Location: Ca
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
What kind of hp and whp numbers should i expect after i finish the swap. 92 sc300 swapin the aristo gte motor with usdm turbos and fmic and an SAFCII. the harness is just getting finished up and i should have it back tues or wednesday? former G35 owner so not sure what to expect with the toyota. eventually soon i will do bigger injectors, cams, and fuel pump. my goal is 450-500whp. trying to setup for drift.
93 OCT @ 18psi expect = 350-380 rwhp.
440CC JDM injectors are going limit you. JDM Cams are going limit you.
Even after fuel upgrades and cam upgrade if you want 450-500rwhp. Dont expect that out of USDM stock turbos even with Race Gas @ 21psi. You are going hurt your turbos bad. You need to go single or upgrade the turbos by then.
I have USDM turbos/cams/550cc injectors/2jzgte fuel pump (good for 550hp). I dyno'd at 350rwhp~ @ 15psi on 91 oct.
#7
Pole Position
iTrader: (1)
Join Date: Jan 2010
Location: Colorado
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Do it right. J/k man, it is easy. Find a sc300 motor (2jzge) off car-part.com look for core motors listed and be sure to get all the bolts as well as a NEW puckup tube +gasket sealer and pickup tube seal from toyota/lexus (see vendor section). GL man should be a fun car!
edit: was your car a sc3 or 4? If it was a sc3 you have all the old parts on your old motor for the rear sump swap.
edit: was your car a sc3 or 4? If it was a sc3 you have all the old parts on your old motor for the rear sump swap.
Trending Topics
#8
Pole Position
iTrader: (1)
Join Date: Jan 2010
Location: Colorado
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Do it right. J/k man, it is easy. You do know that 2jzge/gte as well as 1jz parts all swap back and fourth right? Use your old rear sump setup. Was your old oil pan damaged? If so find a sc300 motor (2jzge) off car-part.com look for core motors listed and be sure to get all the bolts as well as a NEW puckup tube +gasket sealer and pickup tube seal from toyota/lexus (see vendor section). GL man should be a fun car!
#9
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: Texas
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
yea i have the stock motor from the sc3. i plan to to cams, injectors, walbro, and cam gears but funds are running low so just trying to get an idea of where i would be with what i got right now. trying to do side jobs to make extra and sell all my stuff i dont use anymore
#12
Lexus Champion
iTrader: (13)
Join Date: Feb 2008
Location: Sacramento
Posts: 2,187
Likes: 0
Received 0 Likes
on
0 Posts
It depends on the OCT of gas you are running.
93 OCT @ 18psi expect = 350-380 rwhp.
440CC JDM injectors are going limit you. JDM Cams are going limit you.
Even after fuel upgrades and cam upgrade if you want 450-500rwhp. Dont expect that out of USDM stock turbos even with Race Gas @ 21psi. You are going hurt your turbos bad. You need to go single or upgrade the turbos by then.
I have USDM turbos/cams/550cc injectors/2jzgte fuel pump (good for 550hp). I dyno'd at 350rwhp~ @ 15psi on 91 oct.
93 OCT @ 18psi expect = 350-380 rwhp.
440CC JDM injectors are going limit you. JDM Cams are going limit you.
Even after fuel upgrades and cam upgrade if you want 450-500rwhp. Dont expect that out of USDM stock turbos even with Race Gas @ 21psi. You are going hurt your turbos bad. You need to go single or upgrade the turbos by then.
I have USDM turbos/cams/550cc injectors/2jzgte fuel pump (good for 550hp). I dyno'd at 350rwhp~ @ 15psi on 91 oct.
Thread
Thread Starter
Forum
Replies
Last Post
Cleanshots
Performance & Maintenance
4
07-05-08 06:33 PM
slappy96
Performance & Maintenance
5
04-02-08 03:52 PM