Notices
SC - 1st Gen (1992-2000)

check engin

Thread Tools
 
Search this Thread
 
Old Jul 4, 2009 | 11:13 PM
  #1  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default check engin

okay so i was driving today and all of a sudden my traction control light andd my check engin light came on at the same time.. the car seems to be running fine but any ideas what couldove happend...
94 sc400
Reply
Old Jul 6, 2009 | 03:38 PM
  #2  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

anybody have any ideas what couldove caused the 2 lights to come on?
Reply
Old Jul 6, 2009 | 03:44 PM
  #3  
6SOARER's Avatar
6SOARER
Lexus Test Driver
iTrader: (20)
 
Joined: Jan 2009
Posts: 1,234
Likes: 1
From: SoCal
Default

Pull DTC's-codes, its a start to troubleshoot..
Reply
Old Jul 6, 2009 | 03:54 PM
  #4  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

howdo i go about getting the codes?
Reply
Old Jul 6, 2009 | 04:08 PM
  #5  
6SOARER's Avatar
6SOARER
Lexus Test Driver
iTrader: (20)
 
Joined: Jan 2009
Posts: 1,234
Likes: 1
From: SoCal
Default

Read post #3

https://www.clublexus.com/forums/sc-...r-fueling.html

I dont think Autozone checks for check engine light on pre 95' vehicles
Reply
Old Jul 6, 2009 | 04:17 PM
  #6  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

okay so now i got a code 25.. any clue what that means?
Reply
Old Jul 6, 2009 | 04:27 PM
  #7  
6SOARER's Avatar
6SOARER
Lexus Test Driver
iTrader: (20)
 
Joined: Jan 2009
Posts: 1,234
Likes: 1
From: SoCal
Default

GOOGLE it bro, Im at work and about to head home..
Reply
Old Jul 6, 2009 | 04:39 PM
  #8  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

Air–Fuel Ratio Lean Malfunction comes up with that but nothing about how to fix
Reply
Old Jul 6, 2009 | 05:38 PM
  #9  
6SOARER's Avatar
6SOARER
Lexus Test Driver
iTrader: (20)
 
Joined: Jan 2009
Posts: 1,234
Likes: 1
From: SoCal
Default

I would disconnect the battery(disconnect the negative terminal and let it sit for a few minutes-5 mins atleast) to clear the codes just to see if the check engine light will go away. Now if comes back imeditaley or a day later your going to have to diagnose into it deeper.
Now, my Mitchell OnDemand says its a faulty 02 sensor-or faulty ignition circuit. Those are just possibilties. Do you have a voltmeter? Do you know how to check the voltage on a 02 sensor?
Reply
Old Jul 6, 2009 | 06:08 PM
  #10  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

yes i do have a volt meter but no i dont know how to check the o2 sensors
Reply
Old Jul 7, 2009 | 10:41 AM
  #11  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

how should i go about checking the voltage
Reply
Old Jul 7, 2009 | 03:22 PM
  #12  
RCPnoi's Avatar
RCPnoi
Lead Lap
 
Joined: Nov 2008
Posts: 624
Likes: 0
From: PA>FL>JP>WA>JP>WA
Default

If you're running lean then it might be that you have a bad 02 sensor...i remember that i had that problem with mine after switching to aftermarket headers which did not have the catalytic converters.
Reply
Old Jul 10, 2009 | 04:01 PM
  #13  
kenmonster's Avatar
kenmonster
Thread Starter
Driver
iTrader: (1)
 
Joined: Sep 2008
Posts: 120
Likes: 0
From: newyork
Default

okay so i picked up 2 o2 sensors.. for before the cats.. autozone gave me one wrong one and i noticed after i jacked the car up so i figured ill change one for now.. my dumb@ss didnt realise and just changed it with the o2 sensor after the cats.. now are the sensors different from before and after the cats? or can i leave that one in there and just pick up another for before the cats when i exchange the bad one?
if not is it safe to drive like that?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dangt84
LS - 1st and 2nd Gen (1990-2000)
4
Feb 18, 2012 10:15 AM
jststrd
LS - 1st and 2nd Gen (1990-2000)
5
Apr 28, 2011 08:48 PM
rogsc400
SC - 1st Gen (1992-2000)
5
Dec 2, 2009 12:17 PM
DJ TANTRA
NELOC
4
Sep 2, 2007 07:46 PM
RNDRX
RX - 1st Gen (1999-2003)
3
Jun 7, 2006 04:23 PM




All times are GMT -7. The time now is 09:44 PM.