jth3rd

about a month a go my trans went out after doing about 5 launchs
i was do 0-60 test on my 95 stock sc300 with 210,000 miles on it

and i was rev her to about 6000 than slap her in drive then my converter started slippin and then trans stoped going in gear so had to get it towed to
go the trans pulled fluid black and converter fuild black so i had my trans shipped out to aareman.com $1850 to get drag clutchs and a pro drggon stall covrter with 2300 stall and will hold up 750 hp

now waiting to get trans back and Boost Logic Stage 2 NA-Turbo Kit that i orderd

OneJay

iTrader: (14)

Wait, so you were revving it in neutral and dropping it into drive?

tcrow31

iTrader: (6)

LOL 6k rev then slapped into drive poor trans didnt have a chance. Hope you dont decide to do that to ur boost logic trans cause it wont last long either.

CopperShot

iTrader: (1)

No wonder you blew up your trans.........................

scshinobi

iTrader: (3)

so thats what happens when you pop it in drive from 6k

Curry

iTrader: (1)

Lexiss_sc430

iTrader: (2)

wow thank god you don't drive on the roads near my house.


and the best part is that he is going to turbo the car

frdykrugar

Utmost retardation. That's like grabbing onto a fast moving train with your bare hands while you're standing still (your arm will break off like your tranny did).

StiCk3

iTrader: (5)

Almost as good as the kid i met who blew a trans during his driving test while on the highway going about 65. When they took it to the trans shop they didnt know how it failed until they asked the kid what he did. His response: "I put it in P gear for passing"

That rebuilt trans might be a waste of money unless you do some research on how to properly launch your car from a stop. Think about it...

prodigy95

why not just convert it to manual? wouldn't that be and overall better choice?

Kaydee

wow this is fail

DasBach

iTrader: (7)

I read through the entire thread before I said those exact words, glad I didn't double post. +1

JDMmuscle

iTrader: (9)

My IQ dropped after reading this thread....

JspecSC3

iTrader: (4)

This thread is done.