When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The gte and ge block is essentially the same minus some oil squirter so any stroker for the supra would apply to the sc300. That is not a bad price considering the HKS 3.4 stroker is $10k. This is defiantly a forced induction setup.
Of course it can be for either non-fi or FI system. I meant for the money I am sure some people would just do a FI system or do a swap. Unless you are really going hardcore with your setup. IMHO, a storker kit would benefit a 8 cynlinder engine more so a 6. Some of the gearheads on here probaly can make some serious HP with 8k. But with that said, the kit looks nice and I am sure it would compliment your project.
With how sturdy the stock bottom end is on that motor, I would think the $5-6k could be more well invested to making power with a turbo than adding displacement...unless you have an unlimited budget or absolutely needed a 94mm stroke.
Heck, you could probably salvage a 1UZ, rebuild it, get some head work done and some turbo manifolds made for less than the Crower stroker with almost 20% more displacement than the 3.4L.
Ya the BC 3.4 is the cheapest 3.4.. If you want a stroker for less SP sells a 3.25 fully assembeled for 6k. I am personally in the market for building a motor, and insted of a stroker I am planning building a 3l for a big hit
Ya the BC 3.4 is the cheapest 3.4.. If you want a stroker for less SP sells a 3.25 fully assembeled for 6k. I am personally in the market for building a motor, and insted of a stroker I am planning building a 3l for a big hit
What's the cost of the BC 3.4? I know the HKS one is just ridiculous.